Hose Standards
美国软管标准(ANSI hose standards)
| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI Z21.15-1997 | 煤气设备、设备连接阀和软管终端阀的手动煤气阀(同 CGA 9.1) | Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves (same as CGA 9.1) |
| ANSI Z21.15b-2006 | 煤气设备、设备连接阀和软管端部阀的手动操作煤气阀 | Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves (same as CSA 9.1b) |
| ANSI Z21.54-2002 | 便携式户外燃气器具用气体软管连接器(同 CSA 8.4) | Gas Hose Connectors for Portable Outdoor Gas-Fired Appliances (same as CSA 8.4) |
| ANSI Z21.54a Addenda-1992 | 便携式室外燃气器具的软管连接器.补充件 | Gas hose connectors for portable outdoor gas-fired appliances; Addenda |
| ANSI/ASAE S553-2001 | 伸缩式排放软管.规范和性能试验 | Collapsible Emitting Hose (Drip Tape) – Specifications and Performance Testing |
| ANSI/ASME B1.20.7-1991 | 英制软管连接螺纹 | Hose Coupling Screw Threads – Inch |
| ANSI/ASSE 1011-2004 | 软管连接真空轧碎机 | Hose Connection Vacuum Breakers |
| ANSI/ASSE 1052-2004 | 软管连接防回流装置的性能要求 | Performance Requirements for Hose Connection Backflow Preventers |
| ANSI/ASTM E2226-2002 | 软管流使用规程 | Practice for Application of Hose Stream |
| ANSI/ASTM F1347-1997 | 手动燃料软管卷盘规范 | Specification for Manually Operated Fueling Hose Reels |
| ANSI/ASTM F1546/F 1546M-1996 | 消防软管喷嘴的规范 | Specification for Fire Hose Nozzles |
| ANSI/ASTM F2165-2002 | 预绝缘软管规范 | Specification for Flexible Pre-insulated Piping |
| ANSI/ASTM F2290-2003 | 医疗气体用ISO 5359低压软管组件的采用 | Adoption of ISO 5359 Low-pressure Hose Assemblies for Use with Medical Gases |
| ANSI/ASTM F450-2001 | 真空吸尘器软管耐热性及可靠性试验方法(塑料线增强) | Methods for Testing Vacuum Cleaner Hose for Durability and Reliability (Plastic Wire Reinforced) |
| ANSI/ASTM F481-1996 | 化粪池沥滤场用热塑塑料管和波纹软管安装惯例 | Practice for Installation of Thermoplastic Pipe and Corrugated Tubing in Septic Tank Leach Fields |
| ANSI/ASTM F585-1994 | 聚乙烯软管插入现有下水道的惯例 | Practice for Insertion of Flexible Polyethylene Pipe into Existing Sewers |
| ANSI/ASTM F595-2001 | 真空吸尘器软管耐用性及可靠性试验方法(全塑软管) | Methods for Testing Vacuum Cleaner Hose for Durability and Reliability (All-Plastic Hose) |
| ANSI/CLSI H1-A 5-2003 | 静脉取血样用软管和附件;第5版 | Tubes and Additives for Venous Blood Specimen Collection; Approved Standard- Fifth Edition |
| ANSI/IAS NGV4.2-1999 | 天然气车辆和分装系统用软管 | Hoses for Natural Gas Vehicles and Dispensing Systems |
| ANSI/NFPA 14-2003 | 供水管、专用消防栓和软管系统的安装标准 | Standard for the Installation of Standpipe, Private Hydrants, and Hose Systems |
| ANSI/NFPA 1961-2006 | 消防软管 | Fire Hose |
| ANSI/NFPA 1965-2003 | 软管设备标准 | Standard for Hose Appliances |
| ANSI/SAE J1231-1998 | 卷管的软管接头 | Beaded Tube Hose Fittings |
| ANSI/SAE J1401-1993 | 道路车辆.使用非石油基液压油的液压制动软管组件 | Road Vehicle – Hydraulic Brake Hose Assemblies for Use with Non-Petroleum Base Hydraulic Fluids |
| ANSI/SAE J1406-1993 | 汽车辆液压制动软管的应用 | Application of Hydraulic Brake Hose to Motor Vehicles |
| ANSI/SAE J1508-1993 | 软管夹规格 | Hose Clamp Specifications |
| ANSI/SAE J1527-1993 | 船用燃料软管 | Marine Fuel Hoses |
| ANSI/SAE J1737-1997 | 通过反复流动测定燃料管、软管、配件、和燃料组件烃损失的试验程序 | Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes, Hoses, Fittings, and Fuel Line Assemblies by Recirculation |
| ANSI/SAE J188-1998 | 动力转向压力软管.高容积膨胀型 | Power Steering Pressure Hose – High Volumetric Expansion Type |
| ANSI/SAE J189-1998 | 动力转向回流软管.低压 | Power Steering Return Hose – Low Pressure |
| ANSI/SAE J190-1998 | 金属丝编织的动力转向压力软管 | Power Steering Pressure Hose-Wire Braid |
| ANSI/SAE J191-1998 | 动力转向压力软管.低容积膨胀型 | Power Steering Pressure Hose – Low Volumetric Expansion Type |
| ANSI/SAE J20-1997 | 制冷系统软管 | Coolant System Hoses |
| ANSI/SAE J2045-1998 | 管/软管组件 | Tube/Hose Assemblies |
| ANSI/SAE J2050-1993 | 高温助力转向压力软管 | High-Temperature Power Steering Pressure Hose |
| ANSI/SAE J2064-1998 | 汽车用R134a制冷空气调节软管 | R134a Refrigerant Automotive Air Conditioning Hose |
| ANSI/SAE J2076-1993 | 高温动力转向回程软管.低压 | High-Temperature Power Steering Return Hose – Low Pressure |
| ANSI/SAE J2387-1997 | 制冷系统软管尺寸和公差 | Dimensions and Tolerances for Coolant System Hoses |
| ANSI/SAE J30-1998 | 燃料和燃油软管 | Fuel and Oil Hoses |
| ANSI/SAE J51-1998 | 汽车空调软管 | Automotive Air Conditioning Hose |
| ANSI/SAE J516-1997 | 液压软管配件 | Hydraulic Hose Fittings |
| ANSI/SAE J517-1998 | 液压软管 | Hydraulic Hose |
| ANSI/SAE J518-1993 | 四螺栓拼合法兰型液压法兰管、管道及软管接头 | Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type |
| ANSI/UL 1660-2004 | 不透液体的非金属软管的安全标准 | Standard for Safety for Liquid-Tight Flexible Nonmetallic Conduit |
| ANSI/UL 330-1999 | 配送易燃性液体用软管和软管组件的安全性标准 | Standard for Safety for Hose and Hose Assemblies for Dispensing Flammable Liquids |
| ANSI/UL 401-2004 | 防火服务用便携式喷雾软管喷嘴的安全标准 | Standard for Safety for Portable Spray Hose Nozzles for Fire-Protection Service (bulletin dated February 16, 2004) |
| ANSI/UL 536-2000 | 柔性金属软管 | Flexible Metallic Hose |
| ANSI/UL 92-1999 | 灭火器和增压器软管 | Fire Extinguisher and Booster Hose |
| ASME B1.20.7-1991 | 软管联结螺纹(英制) | (Hose coupling screw threads (inch)) |
| ASTM ANS/ISO 5359-2000 | 与美国国家标准有偏差的ASTM国际标准认可的与医疗气体一起使用的低压软管组件 | Low-Pressure Hose Assemblies for Use with Medical Gases Approved as an American National Standard with Deviations by ASTM International |
| ASTM D 1050-2005 | 橡胶绝缘软管的标准规范 | Standard Specification for Rubber Insulating Line Hose |
| ASTM D 3572-1986 | 家用洗衣机和洗碗机用排水软管 | Consumer Product Household Laundry and Dishwasher Drain Hose |
| ASTM D 3573-1986 | 家用水槽喷洒软管 | Consumer Product Sink Spray Hose |
| ASTM D 380-1994 | 橡胶软管的标准试验方法 | Standard Test Methods for Rubber Hose |
| ASTM D 3901-1990 | 民用园林软管 | Consumer Product Garden Hose |
| ASTM D 3902-1990 | 液化石油气气体扩散用橡胶软管的试验方法 | Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas |
| ASTM D 3952-1987 | 太阳能系统用橡胶软管 | Rubber Hose Used in Solar Energy Systems |
| ASTM D 4237-1990 | 蒸汽设备用橡胶软管的试验方法 | Test Methods for Rubber Hose Used for Steam Applications |
| ASTM D 4264-1990 | 室内储水管用橡胶衬里的消防软管和橡胶增强软管的组合件的压力试验方法 | Test Method for Pressure Testing of Assemblies of Rubber-Lined Fire Hose and Rubber Booster Hose in Service on Interior Standpipes |
| ASTM D 622-1999 | 汽车空气制动和真空制动用橡胶软管的试验方法 | Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System |
| ASTM E 2226-2002 | 软管流使用规程 | Standard Practice for Application of Hose Stream |
| ASTM F 1347-1991 | 手工操作的加燃料软管卷盘标准规范 | Standard Specification for Manually Operated Fueling Hose Reels |
| ASTM F 2072-2001 | 薄膜开关软管洗涤的标准实施规程 | Standard Practice for Hosedown of a Membrane Switch |
| ASTM F 450-2001 | 真空吸尘器软管的耐热性及可靠性的标准试验方法 | Standard Test Methods for Vacuum Cleaner Hose – Durability and Reliability (Plastic Wire Reinforced) |
| ASTM F 478-1992 | 绝缘线路软管及覆盖物的使用保养 | In-Service Care of Insulating Line Hose and Covers |
| ASTM F 481-1997 | 化粪池沥滤场用热塑性管道和波纹软管的安装标准实施规范 | Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields |
| ASTM F 585-1994 | 聚乙烯软管同现有污水管插接 | Standard Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers |
| ASTM F 595-2001 | 真空吸尘器软管的耐用性及可靠性试验(全塑软管)的标准试验方法 | Standard Test Methods for Vacuum Cleaner Hose – Durability and Reliability (All-Plastic Hose) |
| UL 181B-1995 | 用于空气软管和空气连接器的密封系统 | (Closure systems for use with flexible air ducts and air connectors ) |
| UL 19-2001 | 带衬的消防软管和软管组件 | (Lined fire hose and hose assemblies ) |
| UL 21-1995 | 液化石油气软管 | (LP-gas hose ) |
| UL 219-1993 | 室内竖管用衬里软管 | (Lined fire hose for interior standpipes ) |
| UL 330-1996 | 用于配送可燃液体的软管和软管组件 | (Hose and hose assemblies for dispensing flammable liquids ) |
| UL 401-1993 | 防火用移动喷水软管喷头 | (Portable spray hose nozzles for fire protection service ) |
| UL 47-1993 | 半自动消防软管存储装置 | (Semiautomatic fire hose storage devices ) |
| UL 536-1997 | 挠性金属软管 | (Flexible metallic hose ) |
| UL 569-1995 | 液化石油气用引线和挠性软管连接器 | (Pigtails and flexible hose connectors for LP-gas ) |
| UL 668-1995 | 消防用软管阀门 | (Hose valves for fire-protection service ) |
| UL 92-1993 | 灭火器和助推器用软管 | (Fire extinguisher and booster hose ) |
英国软管标准(BS hose standards)
| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BS 1103-1989 | 橡胶软管加强用纺织物的规范 | Specification for fabrics for the reinforcement of rubber hoses |
| BS 1435-2-2005 | 抽油和排油用橡胶软管组件.贮存、试验和使用建议 | Rubber hose assemblies for oil suction and discharge services - Recommendations for storage, testing and use |
| BS 1782-1951 | 消防软管接头除外的吸入软管和送水软管接头(1.5英寸至8英寸标称尺寸)规范 | Specification for couplings for suction and delivery hose (11/2 in. to 8 in. nominal sizes) other than fire hose couplings |
| BS 1906-1952 | (标称尺寸1/8英寸-1/4英寸）软管接头(露天和水中使用)规范 | Specification for hose couplings (air and water) (1/8 in. to 11/4 in. nominal sizes) |
| BS 2464-1954 | 汽油、石油和润滑剂用软管接头(标称尺寸 1/4英寸至 4英寸)规范 | Specification for hose couplings for petrol, oil and lubricants (3/4 in. to 4 in. nominal sizes) |
| BS 2464-2-1969 | 石油、汽油和润滑油用软管接头规范.第2部分:高压接头 | Specification for hose couplings for petrol, oil and lubricants - High pressure couplings |
| BS 2464-3-1968 | 汽油、石油和润滑剂用软管接头规范.第3部分:快速接头 | Specification for hose couplings for petrol, oil and lubricants - Quick-acting couplings |
| BS 2464-4-1980 | 汽油、石油和润滑剂用软管接头规范.第4部分:欧洲型 100mm快速接头规范 | Hose couplings for petrol, oil and lubricants - Specification for 100 mm quick-acting couplings: European type |
| BS 2952-1958 | 内燃机冷却系统用橡胶软管规范 | Specification for rubber hose for i.c. engine cooling systems |
| BS 2F 67-1980 | 航空燃料和发动机润滑油用软管规范 | Specification for hose for aviation fuel and engine lubricating oil for aeronautical purposes |
| BS 2M 52-1989 | 航空航天流体系统用软管、管子和配件组件的脉冲试验法 | Method for impulse testing of hydraulic hose, tubing and fitting assemblies for aerospace fluid systems |
| BS 3169-1986 | 消防急救用卷轴胶管规范 | Specification for first aid reel hoses for fire-fighting purposes |
| BS 3212-1991 | 液化石油气体气相与液化石油气露天装置用挠性橡皮管、橡皮软管及软管组件规范 | Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations |
| BS 336-1989 | 消防软管接头与辅助设备的规范 | Specification for fire hose couplings and ancillary equipment |
| BS 3492-1987 | 公路和铁路运输石油产品（包括航空燃油）油罐车软管及软管组件规范 | Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels |
| BS 3592-1-1986 | 软管增强钢丝.第1部分:橡胶软管增强用镀覆圆和扁钢丝规范 | Steel wire for hose reinforcement - Specification for coated round and flat steel wire for rubber hose reinforcement |
| BS 3628-1963 | 通用软管夹子(蜗杆传动式)规范 | Specification for hose clips (worm drive type) for general purpose use |
| BS 3710-1964 | 机车及铁路车辆制动软管连接器规范 | Specification for brake hose couplings for locomotives and rolling stock |
| BS 3746-1990 | 园艺用聚氯乙烯软管规范 | Specification for PVC garden hose |
| BS 3F 63-1981 | 航空用低压氧气软管规范 | Specification for low pressure oxygen hose for aeronautical purposes |
| BS 4089-1999 | 液化石油气和液化天然气用金属软管组件规范 | Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases |
| BS 5122-1986 | 低压和中压饱和蒸汽用橡胶软管规范 | Specification for rubber hoses for low-pressure and medium-pressure saturated steam |
| BS 5173-100-1992 | 橡胶和塑料软管及软管组件试验方法.第100部分:总则 | Method of test for rubber and plastics hoses and hose assemblies - General introduction |
| BS 5173-102.10-1990 | 橡胶和塑料软管组件的试验方法.第102部分:液压试验.第10节:吸油和放油软管静液压试验 | Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Hydrostatic tests for oil suction and discharge hose |
| BS 5173-102.3-1988 | 橡胶和塑料软管及软管组件试验方法.第102部分:液压试验.第3节:燃料分配泵软管体积膨胀测定 | Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of fuel-dispensing pump hoses |
| BS 5173-102.4-1990 | 橡胶和塑料软管组件试验方法.第102部分:液压试验.第4节:液压软管体积膨胀测定 | Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of hydraulic hoses |
| BS 5173-102.8-1987 | 橡胶和塑料软管及软管组件试验方法.第102部分:液压试验.第8节:硬质增强热塑性塑料螺旋管压力脉冲试验 | Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Pressure impulse test for rigid helix reinforced thermoplastics hoses |
| BS 5173-103.13-1994 | 橡胶和塑料软管及软管组件试验方法.第103部分:物理试验.第13节:抗燃性测定 | Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of resistance to fire |
| BS 5173-103.2-1990 | 橡胶和塑料软管组件的试验方法.第103部分:物理试验.第2节:软管耐磨损性测定 | Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of crush resistance of hoses |
| BS 5173-103.6-1990 | 橡胶和塑料软管组件的试验方法.第103部分:物理试验.第6节:衬料可燃性测定 | Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of ignitability of lining |
| BS 5173-103.7-1991 | 橡胶和塑料软管组件的试验方法.第103部分:物理试验.第7节:热塑软管用刚性聚合物螺纹钢筋耐断裂性测定 | Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of fracture resistance of rigid polymer helical reinforcement in thermoplastics hoses |
| BS 5173-106.2-1990 | 橡胶和塑料软管组件的试验方法.第106部分:环境试验.第2节:高温老化试验一般要求 | Methods of test for rubber and plastics hoses and hose assemblies - Environmental tests - General requirements for high temperature ageing tests |
| BS 5244-1986 | 液压橡胶软管及软管组件的使用、贮藏及寿命期限推荐标准 | Recommendations for application, storage and life expiry of hydraulic rubber hoses and hose assemblies |
| BS 5306-1-2006 | 房屋用灭火装置及设备的实施规则.软管卷盘和泡沫引入口 | Code of practice for fire extinguishing installations and equipment on premises - Hose reels and foam inlets |
| BS 5315-1991 | 通用软管夹子(蜗杆驱动型)(米制系列) | Hose clamps (worm drive type) for general purpose use (metric series) |
| BS 5342-1985 | 高压饱和蒸汽橡胶管规范 | Specification for rubber hoses for high-pressure saturated steam |
| BS 5667-5-1979 | 连续式机械装卸设备规范.安全性要求.第5部分:松散物料:气动装卸用连接器与软管件 | Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials: couplings and hose components used in pneumatic handling |
| BS 5842-1980 | 船坞、道路及油轮用热塑性软管组件规范 | Specification for thermoplastic hose assemblies for dock, road and tanker use |
| BS 6130-1-1993 | 地沥青及沥青用软管及软管部件.第1部分:金属软管及软管部件规范 | Hose and hose assemblies for asphalt and bitumen - Specification for flexible metallic hose and hose assemblies |
| BS 6391-1983 | 灭火用无渗漏排水扁形软管与软管组件规范 | Specification for non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes |
| BS 6501-1-2004 | 金属软管组件.波纹形软管组件的构造和使用指南 | Metal hose assemblies - Guidance on the construction and use of corrugated hose assemblies |
| BS 669-1-1989 | 燃气灶具用软管、管接头和承窩接口.第1部分:采用第1、2类燃气的家用灶具用带绕金属软管、护罩、接头配件和 | Flexible hoses, end fittings and sockets for gas burning appliances - Specification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases |
| BS 669-2-1997 | 燃气灶具用软管、接头和管座.第2部分:使用第1、2类燃气的家用灶具波纹金属软管、封盖、接头和管座规范 | Flexible hoses, end fittings and sockets for gas burning appliances - Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st , 2nd and 3rd family gases |
| BS 6920-2.2.2-2000 | 根据非金属产品对水质影响人接触类消耗水要求用水的非金属产品的适宜性.带臭气和香料的水.通过软管、合成管 | Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Odour and flavour of water - Method of testing odours and flavours imparted to water by hoses and composite pipes and tubes |
| BS 6920-2.2.3-2000 | 通过其对水质的影响确定与人类用水接触的非金属产品的适用性.试验方法.水的气味和味道.为食品和饮用水制备 | Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Odour and flavour of water - Method of testing tastes imparted to water by hoses for conveying water for food and drink preparation |
| BS 7379-1991 | 塑料/金属叠层可涨缩软管规范 | Specification for plastics/metal laminate collapsible tubes |
| BS 8451-2004 | 气焊切割和相关工艺用橡胶软管.高度耐扭结重型焊接软管(H型).规范 | Rubber hoses for gas welding, cutting and allied processes - High kink-resistant heavy duty welding hose (type H) - Specification |
| BS AU 110a-1995 | 自动气压制动系统用橡胶软管和软管组件规范 | Specification for rubber hoses and hose assemblies for automotive air pressure braking systems |
| BS EN 10324-2005 | 钢丝和钢丝制品.软管加筋钢丝 | Steel wire and wire products - Hose reinforcement wire |
| BS EN 1113-1997 | 卫生开关龙头用淋浴器软管 | Shower hoses for (PN 10) sanitary tapware |
| BS EN 12083-1998 | 呼吸保护装置.带呼吸软管的过滤器(无面具装配).颗粒过滤器、气体过滤器及颗粒与气体过滤器.要求、试验、标 | Respiratory protective devices - Filters with breathing hoses, (non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking |
| BS EN 12115-2000 | 液体或气体化学药品用橡胶和热塑软管和软管组件.规范 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
| BS EN 12374-1998 | 包装.软管.术语 | Packaging - Flexible tubes - Terminology |
| BS EN 12377-1999 | 包装材料.软管.封装气密性试验方法 | Packaging - Flexible tubes - Test method for the airtightness of closures |
| BS EN 12434-2000 | 低温容器.低温软管 | Cryogenic vessels - Cryogenic flexible hoses |
| BS EN 1256-2006 | 气焊设备.焊接、切割和相关工艺用软管组件规范 | Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
| BS EN 13045-2000 | 包装.圆柱形塑料软管.尺寸和公差 | Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances |
| BS EN 13046-2000 | 包装.圆柱形金属软管.尺寸和公差 | Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances |
| BS EN 13047-2000 | 包装.锥形金属软管.尺寸和公差 | Packaging - Flexible conical metallic tubes - Dimensions and tolerances |
| BS EN 13048-2000 | 包装.铝软管.内部清漆膜厚度测量方法 | Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method |
| BS EN 1327-1996 | 气焊设备.焊接和类似工艺用热固性软管 | Gas welding equipment - Thermoplastic hoses for welding and allied processes |
| BS EN 13482-2002 | 沥青用橡胶软管及软管组件.规范 | Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
| BS EN 13483-2005 | 已测定的燃料分配系统用带内部蒸气回收的橡胶和塑料软管和软管组件.规范 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
| BS EN 1360-2005 | 计量的燃料配送系统用橡胶和塑料软管和软管组件.规范 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
| BS EN 1361-2004 | 航空燃料输送用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for aviation fuel handling - Specification |
| BS EN 13765-2003 | 烃类、溶剂和化学品输送用热塑性多层(非硫化)软管和软管组件.规范 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
| BS EN 13766-2003 | 液化石油气和液化天然气输送用热塑性多层非硫化软管和软管组件.规范 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
| BS EN 138-1994 | 呼吸保护装置.与全罩式面罩、半罩式面罩或口承装置一起使用的新鲜空气软管呼吸机规范 | Respiratory protective devices - Specification for fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly |
| BS EN 13905-2003 | 卫生设备旋塞用低阻力淋浴软管 | Low resistance shower hoses for sanitary tapware |
| BS EN 14420-1-2004 | 带夹具的软管配件.第1部分:要求、测量、名称与符号及测试 | Hose fittings with clamp units - Part 1: Requirements, survey, designation and testing |
| BS EN 14420-2-2004 | 带夹件的软管配件.软管尾部的软管侧面部件 | Hose fittings with clamp units - Hose side parts of hose tail |
| BS EN 14420-3-2004 | 带夹件的软管配件.栓接或销接夹件 | Hose fittings with clamp units - Clamp units, bolted or pinned |
| BS EN 14420-4-2004 | 带夹件的软管配件.第4部分:法兰连接 | Hose fittings with clamp units - Part 4: Flange connections |
| BS EN 14420-5-2004 | 带夹件的软管配件.螺纹连接 | Hose fittings with clamp units - Threaded connections |
| BS EN 14420-6-2004 | 带夹件的软管配件.第6部分:TW油槽车联接器 | Hose fittings with clamp units - Part 6: TW tank truck couplings |
| BS EN 14420-7-2004 | 带夹件的软管配件.第7部分:凸轮锁紧联接器 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| BS EN 14420-8-2004 | 带夹件的软管配件.对称半联轴节(吉尔曼系统) | Hose fittings with clamp units - Symmetrical half coupling (Guillemin system) |
| BS EN 14422-2004 | 液化石油气(LPG)输送软管用夹具型连接组件 | Clamp type coupling assemblies for LPG transfer hoses |
| BS EN 14423-2004 | 额定压力到18bar的蒸汽软管用夹具型连接组件 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| BS EN 14424-2005 | 带螺旋箍的软管管件 | Hose fittings with screwed ferrules |
| BS EN 14454-2005 | 防饮用水回流污染的装置.软管接头防回流装置DN 15～DN 32.A型H系列 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 inclusive - Family H, type A |
| BS EN 14540-2004 | 消防软管.固定系统用非渗滤吹塑软管 | Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
| BS EN 14585-1-2006 | 压力设备用金属波纹软管组件.要求 | Corrugated metal hose assemblies for pressure applications - Requirements |
| BS EN 14800-2007 | 使用气体燃料家用器具连接用波纹状安全金属软管组件 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| BS EN 1680-1997 | 塑料软管系统.聚乙烯(PE)管道系统用的阀门.弯曲力施加在工作机构上和之后的密封性的检验方法 | Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism |
| BS EN 1761-1999 | 燃料卡车交付的橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for fuel truck delivery - Specification |
| BS EN 1762-2004 | 25巴(2,5MPA)以下液化石油气(LPG)(液相或气相)以及天然气用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
| BS EN 1765-2004 | 油吸放装置用橡胶软管组件.组件规范 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
| BS EN 24641-1993 | 吸水和排水用橡胶软管规范 | Rubber hoses for water suction and discharge - Specification |
| BS EN 26801-1985 | 橡胶或塑料软管.体积膨胀的测定 | Rubber or plastics hoses - Determination of volumetric expansion |
| BS EN 26802-1991 | 金属丝增强橡胶塑料软管及软管配件.抗冲击试验 | Rubber and plastics hoses and hose assemblies - Wire reinforced - Hydraulic impulse test with flexing |
| BS EN 269-1995 | 呼吸保护装置.带保护罩的动力驱动的新鲜空气软管呼吸机规范 | Respiratory protective devices - Specification for powered fresh air hose breathing apparatus incorporating a hood |
| BS EN 27326-1991 | 橡胶和塑料软管.静态条件下耐臭氧性评定 | Rubber and plastics hoses - Assessment of ozone resistance under static conditions |
| BS EN 28029-1987 | 塑料软管.织物增强的通用可拆卸水管规范 | Plastics hose - General purpose collapsible water hose, textile reinforced - Specification |
| BS EN 29168-1994 | 牙钻手柄.软管连接件 | Dental handpieces - Hose connectors |
| BS EN 559-2003 | 气焊设备.焊接、切割和相关工艺用橡胶软管 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes |
| BS EN 560-2005 | 气焊设备.焊接、切割和相关工艺用设备的软管连接 | Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes |
| BS EN 60684-3-212-2006 | 绝缘软管.各种型号软管规范.热收缩聚烯烃软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings |
| BS EN 60684-3-216-2005 | 柔性绝缘软管.各种型号软管规范.热收缩、阻燃、耐火软管 | Flexible insulating sleeving - Specifications for individual types of sleeving - Heat-shrinkable, flame-retarded, limited-fire hazard sleeving |
| BS EN 60684-3-228-2004 | 绝缘软套管.各种型号软管规范.阻燃、耐流体、收缩比2:1的热收缩、半硬质聚偏二氟乙烯软套管 | Flexible insulating sleeving - Specification requirements for individual types of sleeving - Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
| BS EN 60684-3-233-2006 | 柔性绝缘软管.各种型号软管规范.热收缩氟弹性体软管、阻燃、耐流体、收缩比2:1 | Flexible insulating sleeving - Specifications for individual types of sleeving - Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
| BS EN 61770-2000 | 连接总水管的电气仪表.避免软管组件反虹吸和损坏 | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets |
| BS EN 62237-2005 | 带电作业.与液压工具和设备一起使用的带配件的绝缘软管 | Live working - Insulating hoses with fittings for use with hydraulic tools and equipment |
| BS EN 694-2004 | 消防软管.固定系统的半硬性软管 | Fire-fighting hoses - Semi-rigid hoses for fixed systems |
| BS EN 739-1998 | 医疗用气体设备的低压软管组件 | Low-pressure hose assemblies for use with medical gases |
| BS EN 788-1994 | 运输食品用的口袋.复合薄膜材料制的软管状提袋 | Sacks for the transport of food aid - Tubular sacks made of composite film |
| BS EN 853-1997 | 软管和软管组件.金属丝编织加强的液压用类型.规范 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| BS EN 854-1997 | 橡胶软管及管组件.纺织物增强的液压用类型.规范 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| BS EN 855-1997 | 塑料软管和软管组件.热塑料纺织物增强的液压用类型.规范 | Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification |
| BS EN 856-1997 | 橡胶软管和软管组件.橡胶包覆螺旋形金属丝增强的液压用类型.规范 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
| BS EN 857-1997 | 软管及软管部件.液压用的金属线编带增强的抗挤压类型.规范 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
| BS EN ISO 10380-2003 | 管道系统.波纹状金属软管和软管组件 | Pipework - Corrugated metal hoses and hose assemblies |
| BS EN ISO 10806-2004 | 管道工程.波纹状金属软管用配件 | Pipework - Fittings for corrugated metal hoses |
| BS EN ISO 10960-1997 | 橡胶和塑料软管.在动态条件下耐臭氧性的评定 | Rubber and plastic hoses - Assessment of ozone resistance under dynamic conditions |
| BS EN ISO 11758-1996 | 橡胶和塑料软管.氙弧灯下照射.颜色和外观变化的测定 | Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance |
| BS EN ISO 1307-1996 | 工业通用橡胶和塑料软管.内直径和公差.长度公差 | Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length |
| BS EN ISO 13628-2-2006 | 石油和天然气工业.海底采油系统的设计和操作.海底和海洋设备用未结合软管系统 | Petroleum and natural gas industries - Design and operation of subsea production systems - Unbonded flexible pipe systems for subsea and marine applications |
| BS EN ISO 1401-2000 | 农业喷雾机用橡胶软管 | Rubber hoses for agricultural spraying |
| BS EN ISO 1402-1997 | 橡胶和塑料软管及软管组件.液压静力试验 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing |
| BS EN ISO 1403-1996 | 一般水用织物增强橡胶软管.规范 | Rubber hoses, textile-reinforced, for general-purpose water applications - Specification |
| BS EN ISO 14113-1997 | 气焊设备.最大设计气压为450巴的压缩和液化气用橡胶和塑料软管组件 | Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar |
| BS EN ISO 14557-2003 | 消防水龙带.橡胶和塑料抽吸软管和软管组件 | Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies |
| BS EN ISO 15465-2004 | 管道.带绕金属软管和软管组件 | Pipework - Stripwound metal hoses and hose assemblies |
| BS EN ISO 15540-1999 | 船舶与海上技术,软管组件的耐火性.试验方法 | Ships and marine technology - Fire resistance of hose assemblies - Test methods |
| BS EN ISO 15541-2001 | 船舶和航海技术.软管组件的抗燃性.试验板的要求 | Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench |
| BS EN ISO 1746-2001 | 橡胶或塑料软管和管件.弯曲试验 | Rubber or plastics hoses and tubing - Bending tests |
| BS EN ISO 2398-1996 | 压缩空气用纺织纤维增强橡胶软管规范 | Rubber hose, textile-reinforced, for compressed air - Specification |
| BS EN ISO 3861-1996 | 喷砂用橡胶软管.规范 | Rubber hoses for sand and grit blasting - Specification |
| BS EN ISO 3994-2001 | 塑料软管.抽吸和排放含水物的螺旋型热塑增强的热塑软管.规范 | Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification |
| BS EN ISO 4023-1992 | 蒸气用橡胶软管.试验方法 | Rubber hoses for steam - Test methods |
| BS EN ISO 4080-1992 | 橡胶和塑料软管及软管组件.透气性测定 | Rubber and plastics hoses and hose assemblies - Determination of permeability to gas |
| BS EN ISO 4671-2001 | 橡胶和塑料软管和软管组件.尺寸测量方法 | Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions |
| BS EN ISO 4672-1999 | 橡胶和塑料软管.低于室温的柔性试验 | Rubber and plastics hoses - Sub-ambient temperature flexibility tests |
| BS EN ISO 5771-1996 | 输送无水氨用橡胶软管和软管组件.规范 | Rubber hose and hose assemblies for transferring anhydrous ammonia - Specification |
| BS EN ISO 5774-2001 | 塑料软管.压缩空气用织物增强的.规范 | Plastics hoses, textile-reinforced, for compressed air - Specification |
| BS EN ISO 6134-2005 | 饱和蒸汽用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for saturated steam - Specification |
| BS EN ISO 6224-1996 | 普通水用织物增强塑料软管 | Plastics hoses, textile-reinforced, for general-purpose water applications - Specification |
| BS EN ISO 6803-1996 | 橡胶或塑料软管和软管组件.非弯曲液压脉冲试验 | Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing |
| BS EN ISO 6806-1996 | 油燃烧器用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for use in oil burners - Specification |
| BS EN ISO 6807-2004 | 旋转式钻探和振动用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specifications |
| BS EN ISO 6808-2001 | 石油类液体抽吸和低压排放用塑料软管和软管组件.规范 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification |
| BS EN ISO 6945-1996 | 橡胶软管.外涂层耐磨性的测定 | Rubber hoses - Determination of abrasion resistance of the outer cover |
| BS EN ISO 7233-1992 | 橡胶和塑料软管及软管部件.吸入阻力测定 | Rubber and plastics hoses and hose assemblies - Determination of suction resistance |
| BS EN ISO 7369-2004 | 管道.金属软管和软管组件.词汇 | Pipework - Metal hoses and hose assemblies - Vocabulary |
| BS EN ISO 7662-1996 | 橡胶和塑料软管.内衬磨损的测定 | Rubber and plastics hoses - Determination of abrasion of lining |
| BS EN ISO 7751-1997 | 橡胶和塑料软管和软管组件.试验压力和爆破压力与设计工作压力之比 | Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure |
| BS EN ISO 7840-2004 | 小艇.耐火燃油软管 | Small craft - Fire-resistant fuel hoses |
| BS EN ISO 8028-2000 | 无空气涂料喷涂用塑料和/或橡胶软管组件.规范 | Rubber and/or plastics hose assemblies for airless paint spraying - Specification |
| BS EN ISO 8030-1998 | 橡胶和塑料软管.易燃性试验方法 | Rubber and plastics hoses - Method of test for flammability |
| BS EN ISO 8031-1997 | 橡胶和塑料软管和软管组件.电阻的测定 | Rubber and plastics hoses and hose assemblies - Determination of electrical resistance |
| BS EN ISO 8032-1999 | 橡胶和塑料软管组件.液压脉冲弯曲试验(半Ω 型试验) | 橡胶和塑料软管组件.液压脉冲弯曲试验(半Ω 型试验) |
| BS EN ISO 8033-2006 | 橡胶和塑料软管.部件间粘合力的测定 | Rubber and plastics hoses - Determination of adhesion between components |
| BS EN ISO 8308-1996 | 橡胶和塑料软管和管系.软管和管壁的透液量的测定 | Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls |
| BS EN ISO 8330-2000 | 橡胶和塑料软管和软管配件.词汇 | Rubber and plastics hoses and hose assemblies - Vocabulary |
| BS EN ISO 8469-2006 | 小艇.非耐火燃气软管 | Small craft - Non-fire-resistant fuel hoses |
| BS EN ISO 8580-1989 | 橡胶和塑料软管.静态抗紫外线辐射测试 | Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions |
| BS ISO 11237-1-2005 | 橡胶软管和软管组件.用于液压系统的金属丝编织增强压实型软管和软管组件.规范.用于油基液体 | Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Oil-based fluid applications |
| BS ISO 11237-2-2006 | 橡胶软管和软管组件.用于液压系统的金属丝编织增强压实型软管和软管组件.规范.用于水基液体 | Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Water-based fluid applications |
| BS ISO 11424-1997 | 内燃机气动系统和真空系统用橡胶软管和导管.规范 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification |
| BS ISO 11425-1997 | 机动车动力转向装置用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for automobile power-steering systems - Specification |
| BS ISO 12151-1-1999 | 液压流体力学和一般用途的连接件.软管配件.有ISO 8434-3 O型环对接密封端的软管组件 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-3 O-ring face-seal ends |
| BS ISO 12151-2-2003 | 液压传动和通用联接件.软管接头.带ISO 8434-1和ISO 8434-4 O形圈24锥形末端的软管接头 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ° cone connector ends with O-rings |
| BS ISO 12151-3-1999 | 液压流体力学和一般应用的连接件.软管配件.带ISO 6162法兰端的软管配件 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6162 flange ends |
| BS ISO 12151-4-2007 | 用于液压流体传动和一般用途的接头.软管配件.带ISO 6149米制螺柱端头的软管配件 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6149 metric stud ends |
| BS ISO 12151-5-2007 | 用于液压流体传动和一般用途的接头.软管组件.带ISO 8434-2 37°扩口端的软管配件 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-2 37 ° flared ends |
| BS ISO 13363-2004 | 船用发动机排湿系统用橡胶和塑料软管.规范 | Rubber and plastics hoses for marine-engine wet-exhaust systems - Specification |
| BS ISO 13774-1999 | 输送内燃机燃料用橡胶和塑料软管.易燃性试验方法 | Rubber and plastics hoses for fuels for internal combustion engines - Method of test for flammability |
| BS ISO 13775-1-2000 | 汽车用热塑管和软管.非燃料应用 | Thermoplastic tubing and hoses for automotive use - Non-fuel applications |
| BS ISO 13775-2-2000 | 汽车用热塑管和软管.石油类燃料用 | Thermoplastic tubing and hoses for automotive use - Petroleum-based fuel applications |
| BS ISO 1436-2-2006 | 橡胶软管和软管组件.金属丝编织增强液压型.规范.用于水基液体 | Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types - Specification - Water-based fluid applications |
| BS ISO 18752-2006 | 橡胶软管和软管组件.金属丝或纺织物.液压设备用的单胎压力加强型.规范 | Rubber hoses and hose assemblies - Wire- or textile-reinforced single pressure types for hydraulic applications - Specification |
| BS ISO 19013-2-2005 | 内燃机燃料回路用橡胶软管和管.规范.汽油燃料 | Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Gasoline fuels |
| BS ISO 21012-2007 | 低温容器.软管 | Cryogenic vessels - Hoses |
| BS ISO 23933-2006 | 航空航天.等级为135 °C/20.684 kPa (275 °F/3 000 psi) 和135 °C/21 000 kPa (275 °F/3 046 psi)的芳族 | Aerospace series - Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 °C/20 684 kPa (275 °F/3 000 psi) and 135 °C/21 000 kPa (275 °F/3 046 psi) - Procurement specification |
| BS ISO 2929-2003 | 油槽车放油用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for bulk fuel delivery by truck - Specification |
| BS ISO 4079-2-2006 | 橡胶软管和软管组件.织物增强液压型.规范.水基流体的应用 | Rubber hoses and hose assemblies - Textile-reinforced hydraulic types - Specification - Water-based fluid applications |
| BS ISO 4081-2006 | 内燃机用制冷系统用橡胶软管和管件.规范 | Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification |
| BS ISO 6605-2003 | 液压传动.软管及软管组件.试验方法 | Hydraulic fluid power - Hoses and hose assemblies - Test methods |
| BS ISO 6805-1995 | 井下采矿用橡胶软管和软管组件.采煤用钢丝加筋液压型.规范 | Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification |
| BS ISO 7314-2003 | 航空航天.液压系统.金属软管组件 | Aerospace - Fluid systems - Metal hose assemblies |
| BS ISO 8066-2-2001 | 汽车空调器用橡胶和塑料软管及软管配件.规范.冷却剂134a | Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Refrigerant 134a |
| BS ISO 8331-2007 | 橡胶和塑料软管及软管组件. 选择、储存、使用和维修指南 | Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance |
| BS ISO 8789-1995 | 机动车辆运送石油液化气用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification |
| BS ISO 8829-2-2006 | 航空.聚四氟乙烯(PTFE)内软管组件试验方法.非金属编制物 | Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies - Non-metallic braid |
| BS ISO 8913-2007 | 航空航天.轻型聚四氟乙烯(PTFE).分级:400 °F/3000 psi (204 ℃/20684 kPa)和204℃/21000 kPa (400 °F/304 | Aerospace - Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 °F/3000 psi (204 °C/20684 kPa) and 204 °C/21000 kPa (400 °F/3046 psi) - Procurement specification |
| BS M 57-1985 | 航空航天用聚四氟乙烯高温盘旋状软管组件规范 | Specification for high temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) for aerospace applications |
德国软管标准(DIN hose standards)
| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 11854-1991 | 食品工业用管配件.不锈钢制软管.带螺纹的软管接头和软管锥形接头 | Food industry fittings; hose unions of stainless steel; threaded hose couplings, conical hose couplings |
| DIN 12215-1975 | 玻璃实验仪器.软管连接用玻璃管端.橄榄形和毛细管端 | Laboratory glassware; glass tube ends for hose connections, olives, capillary tube ends |
| DIN 12865-1973 | 实验室仪器.橡胶管 | Laboratory apparatus; rubber tubing |
| DIN 14312-1985 | 标称压力为16、压力吸水用消防软管B型铝合金联接器 | Aluminium alloy cap fire hose coupling type B, for pressure and suction purposes; nominal pressure 16 |
| DIN 14330-1-1985 | S 28 消防软管用标称压力PN16 C型铝合金联轴器 | Aluminium alloy delivery coupling type C; nominal pressure 16, used for fire hoses S 28 |
| DIN 14330-2-1985 | S 38 消防软管用标称压力PN16 C型铝合金联轴器 | Aluminium alloy delivery coupling type C; nominal pressure 16, used for fire hoses S 32 |
| DIN 14330-3-1978 | 急救S形橡胶管C型输液联接器.第3部分:C-S 28型和C-S 32型输液联接器用连接装置 | Delivery coupling, type C, for first aid rubber hoses S; bind-apparatus for delivery coupling type C-S 28 and C-S 32 |
| DIN 14332-1986 | 输送管路的C型铝合联接器.公称压力16 .用于 C42 消防软管 | Aluminium alloy delivery coupling type C; nominal pressure 16; used for fire hoses C 42 |
| DIN 14461-5-1984 | 与干式灭火上升总管道连接的输送阀装置.PN16救火软管阀 | Delivery valve installations connected with dry rising fire mains; fire hose valve PN 16 |
| DIN 14462 Berichtigung 1-2007 | 灭火用引水管.灭火软管系统和引水管道的规划和安装.DIN 14462-2007勘误表 | Water conduit for fire extinguishing - Planning and installation of fire hose systems and water conduit for fire extinguishing, Corrigenda to DIN 14462:2007-01 |
| DIN 14463-1-2007 | 消防灭火用给水系统.遥控注水和泄水装置.第1部分:消防软管的卷取系统 | Water systems for fire extinguishing - Filling and draining devices operated by remote control - Part 1: For hose reel systems |
| DIN 14572-2002 | 排气金属软管用排气金属软管和联轴器 | Exhaust gas metal hoses and couplings for exhaust gas metal hoses |
| DIN 14819-1982 | 灭火剂用吸收软管.要求.检验方法、处理 | Pick up hose for extinguishing agents; requirements, test methods, treatment |
| DIN 14820-1-2000 | 消防水龙管桥架.第1部分:木制消防软管桥架 | Bridges for fire hoses - Part 1: Bridges for fire hoses of wood |
| DIN 14827-1-2005 | 消防设备.输水软管运输用笼筐.第1部分:B、C和D型输水软管运输用笼筐 | Fire fighting equipment - Cages for transport of delivery hoses - Part 1: Cages for transport of delivery hoses type B, C and D |
| DIN 14828-2004 | 绳索软管架 | Rope hose holders |
| DIN 19658-2-1994 | 灌溉系统用可卷绕聚乙烯(PE)管道和软管.第2部分:形状固定的织物芯层软管.尺寸和供货技术条件 | Polyethylene (PE) coiling pipes and hoses for irrigation systems - Part 2: Hoses with fabric inlay, rigid form; dimensions and technical delivery conditions |
| DIN 19658-3-1988 | 灌溉系统用可盘绕聚乙烯(PE)管和软管.带织物内层的非刚性材料软管.第3部分:尺寸和供货技术条件 | Polyethylene (PE) coiling pipes and hoses for use in irrigation systems; hoses of nonrigid material with woven fabric inner layer; dimensions and technical delivery conditions |
| DIN 20018-1-2003 | 织物增强软管.第1部分:最大工作压力PN 10/16 | Textile-reinforced hoses - Part 1: Maximal working pressure PN 10/16 |
| DIN 20018-2-2003 | 织物增强软管.第2部分:最大工作压力PN 40 | Textile-reinforced hoses - Part 2: Maximal working pressure PN 40 |
| DIN 20018-3-2003 | 织物增强软管.第3部分:最大工作压力PN 100 | Textile-reinforced hoses - Part 3: Maximal working pressure PN 100 |
| DIN 20018-4-2003 | 织物增强软管.第4部分:试验 | Textile-reinforced hoses - Part 4: Testing |
| DIN 20021-1997 | 液压系统.带衬里的软管.DIN EN 853至DIN EN 857的补充件 | Fluid-systems - Hoses with layer - Completation for DIN EN 853 to DIN EN 857 |
| DIN 20029-1990 | 软管管接头.1:3 锥度量规 | Hose fittings; 1:3 taper gauges |
| DIN 20030-1992 | 软管连接件.带柄的直旋塞.尺寸、材料和要求 | Hose fittings; straight-way-cock with grip; dimensions, materials, requirements |
| DIN 20033-1990 | 软管连接件.带压紧螺母的锥形管嘴 | Hose fittings; tapered nozzle with clamping nut |
| DIN 20035-1990 | 软管管接头.法兰管嘴.公称压力16 | Hose fittings; flange nozzle; nominal pressure 16 |
| DIN 20036-1990 | 软管管接头.圆螺纹的管接头套管 | Hose fittings; coupling nipples with round thread form |
| DIN 20037-1990 | 软管管接头.连接套管.尺寸 | Hose fittings; connecting nipple; dimensions |
| DIN 20038-1990 | 软管管接头.接头管嘴 | Hose fittings; coupling nozzles |
| DIN 20039-1998 | 软管连接件.软管夹 | Hose fittings - Hose clamps |
| DIN 20040-1990 | 软管管接头.连接套管阀.公称压力16 | Hose fittings; nipple valves; nominal pressure 16 |
| DIN 20066-2002 | 流体动力系统.软管组件.尺寸、要求 | Fluid power systems - Hose assemblies - Dimensions, requirements |
| DIN 22100-5-1993 | 地下矿井用合成器材和材料.管、管隔离件和软管.安全要求、检验、标识 | Articles and materials from synthetic for use in underground mines; tubes, tube isolations and hoses; safety requirements, testing, marking |
| DIN 24950-1-1978 | 第1部分:液压和气动软管组件术语 | Oilhydraulic and pneumatic; terms for hose assemblies |
| DIN 25624-1-2001 | 有轨机动车部件名称.互通通道.第1部分:橡胶管通道连接 | Terms for railway vehicle parts - Intercommunicating gangways - Part 1: Rubber tube gangway connection |
| DIN 2827-2006 | 化学制品用不锈钢软管 | Hose assemblies of stainless steel for chemical products |
| DIN 3017-1-1998 | 涡轮传动软管卡圈.A型 | Hose clamps with worm gear drive; shape A |
| DIN 3017-2-2002 | 软管卡箍.第2部分:带紧固凸缘的卡箍 | Hose clamps - Part 2: Clamps with fastening lugs |
| DIN 3017-3-2002 | 软管卡箍.第3部分:螺栓卡箍 | Hose clamps - Part 3: Bolt clamps |
| DIN 3017-4-1998 | 软管卡圈.第4部分:技术交货条件 | Hose clamps - Part 4: Technical delivery conditions |
| DIN 3017-5-2002 | 软管卡箍.第5部分:带紧固凸耳的宽带软管卡箍.D型和E型 | Hose clamps - Part 5: Wide strip hose clamps with fastening lugs; Types D and E |
| DIN 3021-1-1999 | 软管夹件.弹簧板夹件(FBS).第1部分:尺寸、标记、材料和类型 | Hose clamps - Spring band clamp - Part 1: Dimensions, marking, materials, types |
| DIN 3021-2-1999 | 软管夹子.弹簧带夹子.第2部分:交货技术条件 | Hose clamps - Spring band clamp - Part 2: Technical delivery conditions |
| DIN 3021-3-1999 | 软管夹子.弹簧带夹子.第3部分:系统: 弹簧带夹子-软管-插口 | Hose clamps - Spring band clamp - Part 3: System: Spring band clamp-hose-spigot |
| DIN 30664-1-1994 | 不带外罩和配筋的实验室用燃气灶软管.第1部分:安全要求和试验 | Hoses for gasfired burners for laboratories, without shroud and armoring - Part 1: Safety requirements and tests |
| DIN 30693-1980 | 液化石油气用软管的防断裂安全防护装置 | Safety devices against rupture of flexible tubes for LPG |
| DIN 3238-2001 | 压缩空气匹配件.爪状匹配件,带安全螺母内部宽度42mm,具有凸或凹软管连接末端的匹配件连接环 | Couplings for compressed air - Claw coupling, 42 mm internal width, with securing nut - Coupling with male, female and hose connection ends, joint ring |
| DIN 3285-1988 | 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.软管连接管 | Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples |
| DIN 3291-1988 | 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带螺纹的软管连接管 | Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples |
| DIN 3383-1-1990 | 煤气软管组件和连接阀.安全软管组件、带有快速连接装置的安全阀 | Hose assemblies and connection valves for gas; safety hose assemblies, safety valves with quick connecting device |
| DIN 3383-2-1996 | 燃气软管及连接件.第2部分:刚性连接软管 | Hose assemblies and connection valves for gas - Part 2: Hose assemblies for rigid connection |
| DIN 3383-4-1991 | 软管组件和连接配件.煤气用安全连接配件和试验室管路用接头 | Hose assemblies and connection fittings; safety connection fittings for gas and couplings for laboratory tubing |
| DIN 3384-2007 | 燃气用不锈钢软管组件.安全要求、测试和标记 | Hose assemblies of stainless steel for gas - Safety requirements, testing, marking |
| DIN 3489-2001 | 压缩空气匹配件.爪状匹配件,无安全螺母的42mm内宽,凸形凹形匹配件,软管和封闭连接末端旋转匹配件,连接环 | Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring |
| DIN 47632-1-1978 | 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.保护性连接套管 | Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; joint protection boxes |
| DIN 47632-2-1978 | 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.内套管 | Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal joint boxes |
| DIN 47632-3-1978 | 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.导线横截面的配置 | Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; allocation of conductor cross sections |
| DIN 47632-4-1978 | 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.内部结构 | Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal construction |
| DIN 4815-2-1979 | 液化气用软管.软管组件 | Hoses for LPG; hose assemblies |
| DIN 4815-3-1985 | 液化气用软管.运输车辆用加气和排空用软管管道 | Flexible tubes for LPG; flexible tubes for filling and emptying of transportation vehicles |
| DIN 4815-4-1987 | 液化石油气用软管.车辆燃气装置用软管和软管组件 | Hoses for LPG; hoses and hose assemblies for fuel gas installations in vehicles |
| DIN 4815-5-1988 | 液化气用软管.车辆液化气管道用软管接合器.第5部分:安全要求概念、试验、标记 | Hoses for LPG; coupling for LPG hose assemblies in vehicles; concepts safety requirements, tests, marking |
| DIN 49012-1982 | 电气装置用导管和管件.用于重机械应力的金属软管.结构形式和要求 | Conduits and fittings for electrical installation; flexible metal conduits for heavy mechanical stresses construction types and requirements |
| DIN 5065-1987 | 包装.金属及塑料软管用端口塑料密封物 | Packaging; plastic closures for metal and plastic tubes |
| DIN 6103-2002 | 包装材料.圆柱形塑料软管.同轴多层管.尺寸、材料 | Means of packaging - Flexible cylindrical plastic tubes - Coex multilayer tube; Dimensions, materials |
| DIN 65164-1-1997 | 航空航天.非金属编织软管.第1部分:尺寸、重量 | Aerospace - Non metallic braided cable sleevings - Part 1: Dimensions, masses |
| DIN 65164-2-1997 | 航空航天.非金属编织软管.第2部分:技术规范 | Aerospace - Non metallic braided cable sleevings - Part 2: Technical specification |
| DIN 65178-6-1987 | 航空航天.液体管道的构造和设计.软管组件、制造 | Aerospace; configuration and design of fluid pipelines; hose assemblies, manufacture |
| DIN 65210-1-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第1部分:软管技术规范 | Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hoses |
| DIN 65210-2-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第2部分:软管配件技术规范 | Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hose fittings |
| DIN 65210-3-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第3部分:成套软管组件技术规范 | Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for complete hose assemblies |
| DIN 65211-1-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第1部分:软管技术规范 | Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hoses |
| DIN 65211-2-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第2部分:软管配件技术规范 | Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hose fittings |
| DIN 65211-3-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第2部分:成套软管组件技术规范 | Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for complete hose assemblies |
| DIN 65212-1988 | 航空航天.仪表的低压软管.技术规范 | Aerospace; instrumentation low pressure hoses; technical specification |
| DIN 65213-1988 | 航空航天.公称压力为35巴以下的套管连接用软管.技术规范 | Aerospace; hoses for sleeve attachment for nominal pressures up to 35 bar; technical specification |
| DIN 73379-1-1997 | 燃油软管.第1部分:尺寸、材料、标记 | Fuel hoses - Part 1: Dimensions, material, marking |
| DIN 73379-2-1997 | 燃油软管.第2部分:要求和试验 | Fuel hoses - Part 2: Requirements and tests |
| DIN 73411-1-1996 | 汽车冷却管.软管和元件.第1部分:尺寸、材料、类型 | Cooling pipes in motor vehicles - Hoses and compounds - Part 1: Dimensions, materials, types |
| DIN 73411-2-1996 | 汽车冷却管.软管和化合物.第2部分:要求和试验 | Cooling pipes in motor vehicles - Hoses and compounds - Part 2: Requirements, testing |
| DIN 74225-1991 | 液压制动软管组件.制动用软管接头.制动软管夹 | Brake hose assemblies; brake hose fittings; brake hose clips |
| DIN 74286-1988 | 气压制动系统.双管气压制动系统的软管联结器的密封圈 | Air braking systems; packing rings for hose couplings for double line braking systems |
| DIN 74304-1987 | 压接管接头.软管接头 | Compression coupling; hose coupling |
| DIN 74310-1-1993 | 气压制动设备.软管.尺寸、材料、标志 | Air braking systems; hoses; dimensions, material, marking |
| DIN 74310-2-1993 | 气压制动设备.软管.要求、试验 | Air braking systems; hoses; requirements, tests |
| DIN 74325-1988 | 气压制动系统.软管连接管.形状和尺寸 | Air braking systems; hose nipples; shapes, dimensions |
| DIN 7591-1981 | 家用设备的水管配件.公称压力10巴的两端用软管连接的带扁平垫圈的螺纹连接管 | Water fittings for domestic installation; Screwed unions with flat gasket for hose connection on either side, designed for nominal pressure 10 |
| DIN 7714-1975 | 硬橡胶管 | Ebonite pipes |
| DIN 7715-40-1998 | 橡胶产品.尺寸公差.软管 | Rubber products - Dimmensional tolerances; hoses |
| DIN 85005-2-1999 | 船舶和海上技术.技术文献的图形符号.第2部分:管和软管组件.管和软管连接.套管 | Ships and marine technology - Graphical symbols for technical documentation - Part 2: Piping and hose assemblies, pipe and hose-joints, penetrations |
| DIN 8541-2-1987 | 焊接、切割和相关工艺用软管.燃料气体、氧气和其它不可燃气体用带外保护套的软管 | Hoses for welding, cutting and allied processes; hoses with protective cover for use with fuel gas, oxygen and other non-combustible gases |
| DIN 8541-3-1995 | 焊接、切割和相关工艺用橡胶软管.第3部分:特殊要求用有涂层和无涂层的氧化橡胶软管.安全要求和检验 | Rubber hoses for welding, cutting and allied processes - Part 3: Oxygen rubber hoses with and without coatings for special requirements; safety requirements and testing |
| DIN 86200-1989 | 灭火和甲板冲洗设备.软管接头.管件.软管.附件.造船用各类管件产品概要 | Fire extinguishing and wash deck installation; hose couplings, armatures, hoses, accessories; summary of types for shipbuilding |
| DIN 86204-1993 | 船舶用黄铜制公称压力16的C型整体消防软管接头 | Solid fire hose coupling type C, PN 16; made of brass, for use on ships |
| DIN 86205-1993 | 船舶用黄铜制公称压力16的B型整体消防软管接头 | Solid fire hose coupling type B, PN 16; made of brass for use on ships |
| DIN 86211-1991 | 公称压力（PN）16、带C或B型消防软管管接头和带法兰连接的灭火阀 | Fire valves for PN 16, with fire hose couplings type C or B and with flange connection |
| DIN 9462-1987 | 航空航天.软管组件.测量 | Aerospace; hose assemblies; survey |
| DIN CEN/TS 14421-2007 | 压接和模锻的软管口和金属环 | Hose tail and ferrule for crimping and swaging; German version CEN/TS 14421:2006 |
| DIN EN 10324-2004 | 钢丝和钢丝制品.软管加筋线 | Steel wire and wire products - Hose reinforcement wire; German version EN 10324:2004 |
| DIN EN 1113-1997 | 盥洗室(PN 10)管件用淋浴喷头软管 | Showers hoses for (PB 10) sanitary tapware; German version EN 1113:1997 |
| DIN EN 12115 Bb.1-2001 | 液体或气体化学品用橡胶和热塑软管和软管组件.规范.耐受性 | Rubber and thermoplastic hoses and hose assemblies for liquid or gaseous chemicals - Specification - Resistance |
| DIN EN 12115-1999 | 液体或气体化合物用橡胶和热塑性软管及软管组件.规范 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:1999 |
| DIN EN 12324-1-1999 | 灌溉方法.喷灌用绕软管轮系统.第1部分:尺寸系列 | Irrigation technic - Reel machine systems - Part 1: Size series; German version EN 12324-1:1998 |
| DIN EN 12375-1998 | 包装.铝软管.管壁厚度的测定方法 | Packaging - Flexible aluminium tubes - Wall thickness determination method; German version EN 12375:1998 |
| DIN EN 12377-1998 | 包装材料.软管材.封闭体的气密性试验方法 | Packaging - Flexible tubes - Test method for the air tightness of closures; German version EN 12377:1998 |
| DIN EN 12434-2000 | 低温容器.低温软管 | Cryogenic vessels - Cryogenic flexible hoses; German version EN 12434:2000 |
| DIN EN 1256-2006 | 气焊设备.焊接、切割和相关工艺设备用软管组件规范 | Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes; German version EN 1256:2006 |
| DIN EN 13045-2000 | 包装.圆柱形塑料软管.尺寸和公差 | Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances; German version EN 13045:2000 |
| DIN EN 13046-2000 | 包装.圆柱形金属软管.尺寸和公差 | Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances; German version EN 13046:2000 |
| DIN EN 13047-2000 | 包装.圆锥形金属软管.尺寸和公差 | Packaging - Flexible conical metallic tubes - Dimensions and tolerances; German version EN 13047:2000 |
| DIN EN 13048-2000 | 包装.铝软管.内部清漆薄膜厚度测量方法 | Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method; German version EN 13048:2000 |
| DIN EN 13180-2002 | 建筑物通风.通气管结构.软管尺寸和机械要求 | Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts; German version EN 13180:2001 |
| DIN EN 1327-1996 | 气焊机.焊接及相关工艺用热塑软管 | Gas welding equipment - Thermoplastic hoses for welding and allied processes; German version EN 1327:1996 |
| DIN EN 13461-2001 | 包装.圆柱形层压软管.尺寸和公差 | Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances; German version EN 13461:2001 |
| DIN EN 13482-2002 | 沥青用橡胶软管及软管组件.规范 | Rubber hoses and hose assemblies for asphalt and bitumen - Specification; German version EN 13482:2001 |
| DIN EN 13483-2005 | 可测量的燃料分配系统用带内部蒸气回收的橡胶和塑料软管和软管组件.规范 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification; German version EN 13483:2005 |
| DIN EN 1360-2005 | 已测燃料分配系统用橡胶和塑料软管及软管组件.规范 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification; German version EN 1360:2005 |
| DIN EN 1361-2004 | 航空燃料输送用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for aviation fuel handling - Specification; German version EN 1361:2004 |
| DIN EN 13765-2003 | 烃类、溶剂和化学品输送用热塑性多层(非硫化)塑料软管和软管组件.规范 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification; German version EN 13765:2003 |
| DIN EN 13766-2003 | 液化石油气和液化天然气输送热塑性多层非硫化软管和软管组件.规范 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification; German version EN 13766:2003 |
| DIN EN 138-1994 | 呼吸防护器.清洁空气.全面罩、半面罩或口罩连接软管装置.要求、测试,标记 | Respiratory protective devices - Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly - Requirements, testing, marking; German version EN 138:1994 |
| DIN EN 13905-2003 | 卫生设备旋塞用低阻力淋浴软管 | Low resistance shower hoses for sanitary tapware; German version EN 13905:2003 |
| DIN EN 14420-1-2007 | 带夹具的软管配件.第1部分:要求、检查、名称与符号和试验 | Hose fittings with clamp units - Part 1: Requirements, survey, designation and testing; English version of DIN EN 14420-1:2007-04 |
| DIN EN 14420-2-2005 | 带夹件的软管配件.第2部分:软管尾部的软管侧面部件 | Hose fittings with clamp units - Part 2: Hose side parts of hose tail; German version EN 14420-2:2004 |
| DIN EN 14420-3-2005 | 带夹件的软管配件.第3部分:栓接或销接夹件 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned; German version EN 14420-3:2004 |
| DIN EN 14420-4-2007 | 带夹具的软管配件.第4部分:法兰接头 | Hose fittings with clamp units - Part 4: Flange connections; English version of DIN EN 14420-4:2007-04 |
| DIN EN 14420-5-2005 | 带夹件的软管配件.第5部分:螺纹连接 | Hose fittings with clamp units - Part 5: Threaded connections; German version EN 14420-5:2004 |
| DIN EN 14420-6-2007 | 带夹具的软管配件.第6部分:TW油罐车接头 | Hose fittings with clamp units - Part 6: TW tank truck couplings (includes Amendment A1:2007); English version of DIN EN 14420-6:2004+A1:2007-04 |
| DIN EN 14420-7-2007 | 带夹件的软管配件.第7部分:凸轮锁紧接头 | Hose fittings with clamp units - Part 7: Cam locking couplings (includes Amendment A1:2007); English version of DIN EN 14420-7:2007-04 |
| DIN EN 14420-8-2007 | 带夹具的软管配件.第8部分:对称半节管接头(吉尔曼系统) | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) (includes Amendment A1:2007); English version of DIN EN 14420-8:2007-04 |
| DIN EN 14422-2005 | LPG传送软管用对壳式耦合组件 | Clamp type coupling assemblies for LPG transfer hoses; German version EN 14422:2004 |
| DIN EN 14423-2005 | 额定电压18巴及以下的蒸汽软管用对壳式耦合组件 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar; German version EN 14423:2004 |
| DIN EN 14424-2005 | 带螺旋箍的软管管件 | Hose fittings with screwed ferrules; German version EN 14424:2004 |
| DIN EN 14454-2005 | 防饮用水回流污染的装置.软管接头防回流装置DN 15至DN 32. A型H系列 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H; type A; German version EN 14454:2005 |
| DIN EN 14540-2007 | 灭火软管.固定系统用非渗滤扁平软管 | Fire-fighting hoses - Non-percolating layflat hoses for fixed systems; German version EN 14540:2004 + A1:2007 |
| DIN EN 14585-1 Bb.1-2006 | 压力设备用波纹金属软管组件.第2部分:合格评定程序使用指南 | Corrugated metal hose assemblies for pressure applications - Guidance on the use of conformity assessment procedures; English version of DIN EN 14585-1 Supplement 1:2006-04 |
| DIN EN 14585-1-2006 | 压力设备用波纹金属软管组件.第1部分:要求 | Corrugated metal hose assemblies for pressure applications - Part 1: Requirements; German version EN 14585-1:2006 |
| DIN EN 14800-2007 | 使用气体燃料连接家用器具的波纹状安全金属软管组件 | Corrugated safety metal hose assemblies for the connection domestic appliance using gaseous fuels; German version EN 14800:2007 |
| DIN EN 1736-2000 | 制冷系统和热泵.软管元件、隔振器和膨胀节.要求、设计和安装 | Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation; German version EN 1736:2000 |
| DIN EN 1761-1999 | 油罐车输油橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for fuel truck delivery - Specification; German version EN 1761:1999 |
| DIN EN 1762-2004 | 25巴(2.5MPA)及以下液化石油气、LPG(液相和气相)和天然气用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase) and natural gas up to 25 bar (2,5 MPa) - Specification; German version EN 1762:2003 |
| DIN EN 1763-1-2001 | 商用汽态丙烷、丁烷及其混合物用橡胶和塑料管、软管和配件.第1部分:橡胶管、塑料管和软管要求 | Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixture in the vapour phase - Part 1: Requirements for rubber and plastics tubing and hoses; German version EN 1763-1:2000 |
| DIN EN 1763-1-2001 | 商用汽态丙烷、丁烷及其混合物用橡胶和塑料管、软管和配件.第1部分:橡胶管、塑料管和软管要求 | Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixture in the vapour phase - Part 1: Requirements for rubber and plastics tubing and hoses; German version EN 1763-1:2000 |
| DIN EN 1765-2005 | 油的吸放设备用橡胶软管组件.组件规范 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies; German version EN 1765:2004 |
| DIN EN 1947-2007 | 消防软管.泵和水车用半刚性输水软管和软管组件 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles; German version EN 1947:2002 + A1:2007 |
| DIN EN 24641-1993 | 给排水橡胶软管.要求 | Rubber hoses for water suction and discharge; specification (ISO 4641:1991); German version EN 24641:1993 |
| DIN EN 26801-1993 | 橡胶和塑料软管.体积膨胀的测定 | Rubber or plastics hoses; determination of volumetric expansion (ISO 6801:1983); German version EN 26801:1993 |
| DIN EN 26802-1993 | 金属丝增强的橡胶和塑料软管组件.挠曲状态下液压脉冲试验 | Rubber and plastics hose and hose assemblies with wire reinforcements; hydraulic impulse test with flexing (ISO 6802:1991); german version EN 26802:1993 |
| DIN EN 269-1994 | 呼吸防护器.加护罩的电动式新鲜空气软管呼吸器.要求、检验、标记; 德文版本 EN 269:1994 | Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing, marking; German version EN 269:1994 |
| DIN EN 27326-1993 | 橡胶和塑料软管.静态条件下耐臭氧性能的评定 | Rubber and plastics hoses; assessment of ozone resistance under static conditions (ISO 7326:1991); German version EN 27326:1993 |
| DIN EN 28029-1993 | 塑料软管.一般用途的纺织物增强的可折叠水管 | Plastics hose; general purpose collapsible water hose, textile reinforced; specification (ISO 8029:1985); German version EN 28029:1993 |
| DIN EN 29168-1994 | 手持式牙科器械.软管连接件 | Dental handpieces - Hose connectors (ISO 9168:1991); German version EN 29168:1994 |
| DIN EN 559-2003 | 气焊机.焊接、切割和相关工艺用橡胶软管 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes; German version EN 559:2003 |
| DIN EN 560-2005 | 气焊设备.焊接、切割和相关工艺用设备的软管连接 | Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes; German version EN 560:2005 |
| DIN EN 60684-3-151-1999 | 绝缘软管套.第3部分:各类管套的规范.第151页:挤压成型的聚氯乙烯/腈橡胶管套.一般应用 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheet 151: Extruded PVC/nitrile sleeving; general purpose (IEC 60684-3-151:1998); German version EN 60684-3-151:1998 |
| DIN EN 60684-3-151-1999 | 绝缘软管套.第3部分:各类管套的规范.第151页:挤压成型的聚氯乙烯/腈橡胶管套.一般应用 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheet 151: Extruded PVC/nitrile sleeving; general purpose (IEC 60684-3-151:1998); German version EN 60684-3-151:1998 |
| DIN EN 60684-3-212 Berichtigung 1-2007 | 绝缘软管.第3部分:各种型号软管规范.活页212:热收缩聚烯烃软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings (IEC 60684-3-212:2005); German version EN 60684-3-212:2006, Corrigenda to DIN EN 60684-3-212 (VDE 0341-3-212):2006-08; CENELEC-Corrigendum November 2006 to EN 60684-3-212:2006 |
| DIN EN 60684-3-212-2006 | 绝缘软套管.第3部分:各种型号软管规范.活页212:热收缩聚烯烃软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings (IEC 60684-3-212:2005); German version EN 60684-3-212:2006 |
| DIN EN 60684-3-228-2005 | 绝缘软套管.第3部分:各种型号软管规范.活页228:阻燃、耐流体、收缩比2:1的热收缩、半硬质聚偏二氟乙烯软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-228:2004); German version EN 60684-3-228:2004 |
| DIN EN 60684-3-233-2006 | 绝缘软管衬.第3部分:各类管衬的规范.第233页:阻燃的耐流体的收缩比为2:1的热收缩含氟弹性管套(IEC 60684-3- | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable, fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-233:2006); German version EN 60684-3-233:2006 |
| DIN EN 60684-3-240 bis 243-2003 | 绝缘软管.第3部分:各型软管规范.240至243节:热收缩聚四氟乙烯(PTFE)绝缘软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 240 to 243: Heat-shrinkable PTFE sleeving (IEC 60684-3-240 to 243:2002); German version EN 60684-3-240 to 243:2002 |
| DIN EN 60684-3-271-2005 | 绝缘软套管.第3部分:各种型号软管规范.活页271:阻燃、耐流体、收缩比2:1的热收缩高弹性软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-271:2004); German version EN 60684-3-271:2004 |
| DIN EN 60684-3-300-2003 | 绝缘软管.第3部分:各型软管规范.300节:无涂层玻璃纤维编织软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated (IEC 60684-3-300:2002); German version EN 60684-3-300:2002 |
| DIN EN 60684-3-320-2003 | 绝缘软管.第3部分:各型软管规范.320节:轻度浸渍的聚对苯二甲酸乙二醇酯编织物 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated (IEC 60684-3-320:2002); German version EN 60684-3-320:2002 |
| DIN EN 60684-3-343 bis 345-2003 | 绝缘软管.第3部分:各型软管规范.343至345节:无涂层可扩张乙烯三氟氯乙烯纤维编织软管 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated (IEC 60684-3-343 to 345:2002); German version EN 60684-3-343 to 345:2002 |
| DIN EN 60684-3-400 bis 402-2003 | 绝缘软管.第3部分:各型软管规范.400至402节:带硅弹性涂层的玻璃纤维软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating (IEC 60684-3-400 to 402:2002); German version EN 60684-3-400 bis 402:2002 |
| DIN EN 60684-3-403 bis 405-2003 | 绝缘软管.第3部分:各型软管规范.403至405节:丙烯酸酯玻璃纤维编织软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 403 to 405: Glass textile sleeving with acrylic coating (IEC 60684-3-403 to 405:2002); German version EN 60684-3-403 to 405:2002 |
| DIN EN 60684-3-406 bis 408-2004 | 绝缘软管.第3部分:各种型号软管规范.活页406-408:带PVC涂层的玻璃纤维编织软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating (IEC 60684-3-406 bis 408:2003); German version EN 60684-3-406 bis 408:2003 |
| DIN EN 60684-3-420 bis 422-2003 | 绝缘软管.第3部分:各型软管规范.420至422节:丙烯酸酯聚酯纤维软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating (IEC 60684-3-420 to 422:2002); German version EN 60684-3-420 bis 422:2002 |
| DIN EN 61479-2002 | 带电作业.绝缘材料的柔性导体封盖物 (线路软管) (IEC 61479:2001 + A1:2002); 德文版本 EN 61479:2001 + A1 | Live working - Flexible conductor covers (line hoses) of insulating material (IEC 61479:2001 + A1:2002); German version EN 61479:2001 + A1:2002 |
| DIN EN 61770-2007 | 与总水管连接的电气器具.避免软管组件的反虹吸和失效 | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets (IEC 61770:1998 + A1:2004 + A2:2006); German version EN 61770:1999 + Corrigendum December 2005 + A1:2004 + A2:2006 |
| DIN EN 62237-2005 | 带电作业.液压工具和设备用带配件的绝缘软管 | Live working - Insulating hoses with fittings for use with hydraulic tools and equipment (IEC 62237:2003, modified); German version EN 62237:2005 |
| DIN EN 671-1-2001 | 固定式消防系统.水龙带系统.第1部分:半刚性水龙带的软管卷盘; 德文版本 EN 671-1:2001 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose; German version EN 671-1:2001 |
| DIN EN 671-2/A1-2004 | 固定式消防系统.软管系统.第2部分:带吹塑软管的软管系统 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose; German version EN 671-2:2001/A1:2004 |
| DIN EN 671-3-2000 | 固定的消防设备.软管系统.第3部分:半钢性软管卷曲机和扁平软管系统维修 | Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose; German version EN 671-3:2000 + AC:2000 |
| DIN EN 694-2007 | 消防软管.固定系统用半刚性软管 | Fire-fighting hoses - Semi-rigid hoses for fixed systems; German version EN 694:2001 + AC:2002 + AC:2003 + A1:2007 |
| DIN EN 739-2002 | 医疗气体用低压软管组件(包括修改件A1:2002); 德文版本 EN 739:1998 + A1:2002 | Low-pressure hose assemblies for use with medical gases (includes Amendment A1:2002); German version EN 739:1998 + A1:2002 |
| DIN EN 853-1997 | 橡胶软管和软管组件.带金属丝编织层的液压软管.规范 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification; German version EN 853:1996 |
| DIN EN 854-1997 | 橡胶软管和软管组件.带织物编织层的液压软管.规范 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification; German version EN 854:1996 |
| DIN EN 855-1997 | 塑料软管和软管组件.带织物编织层的塑料液压软管.规范 | Plastic hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification; German version EN 855:1996 |
| DIN EN 856-1997 | 橡胶软管和软管组件.带金属丝螺旋垫层的液压软管.规范 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification; German version EN 856:1996 |
| DIN EN 857-1997 | 橡胶软管和软管组件.带金属丝编织层的紧凑型液压软管.规范 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification; German version EN 857:1996 |
| DIN EN 908-1999 | 农林机械.带软管卷筒的喷灌机.安全性 | Agricultural and forestry machinery - Reel machines for irrigation - Safety; German Version EN 908:1999 |
| DIN EN ISO 10380-2003 | 管道系统.波纹状金属软管和软管组件 | Pipework - Corrugated metal hose and hose assemblies (ISO 10380:2003); German version EN ISO 10380:2003 |
| DIN EN ISO 10806-2004 | 管道工程.波纹状金属软管用配件 | Pipework - Fittings for corrugated metal hoses (ISO 10806:2003); German version EN ISO 10806:2003 |
| DIN EN ISO 10807-1997 | 管道工程.爆燃性空气电缆保护用波纹金属软管组件 | Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres (ISO 10807:1994); German version EN ISO 10807:1996 |
| DIN EN ISO 10960-1996 | 橡胶和塑料软管.动态耐臭氧性评估 | Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:1994); German version EN ISO 10960:1996 |
| DIN EN ISO 11758-1997 | 橡胶和塑料软管.氙弧灯曝光.颜色和外观变化 | Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance (ISO 11758:1995); German version EN ISO 11758:1997 |
| DIN EN ISO 1307-1996 | 工业通用橡胶和塑料软管.内径和公差、长度公差 (ISO 1307:1992); 德文版本 EN ISO 1307:1995 | Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length (ISO 1307:1992); German version EN ISO 1307:1995 |
| DIN EN ISO 13628-2-2006 | 石油天然气工业.海底生产系统设计和操作.第2部分:海底和船用自由软管系统(ISO 13628-2-2006) | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications (ISO 13628-2:2006); English version EN ISO 13628-2:2006 |
| DIN EN ISO 1401-2000 | 农业喷灌用橡胶软管 | Rubber hoses for agricultural spraying (ISO 1401:1999); German version EN ISO 1401:1999 |
| DIN EN ISO 1402-1996 | 橡胶和塑料软管及软管组件.液压静力试验 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994); German version EN ISO 1402:1996 |
| DIN EN ISO 14113-1997 | 气焊设备.最大设计压力不超过450巴液化气橡胶及塑料软管组件 | Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997); German version EN ISO 14113:1997 |
| DIN EN ISO 15465-2004 | 管道工程.带绕金属软管和软管配件 | Pipework - Stripwound metal hoses and hose assemblies (ISO 15465:2004); German version EN ISO 15465:2004 |
| DIN EN ISO 15540-2002 | 船舶和航海技术.软管组件耐燃性.试验方法 | Ships and marine technology - Fire resistance of hose assemblies - Test methods (ISO 15540:1999); German version EN ISO 15540:2001 |
| DIN EN ISO 15541-2002 | 船舶和航海技术.软管组件耐燃性.试验板要求 | Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999); German version EN ISO 15541:2001 |
| DIN EN ISO 1746-2000 | 橡胶或塑料软管和管道.弯曲试验 | Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including Technical Corrigendum 1:1999); German version EN ISO 1746:2000 |
| DIN EN ISO 2398-1997 | 压缩空气用纺织纤维增强橡胶软管.规范 | Rubber hose, textile-reinforced, for compressed air - Specification (ISO 2398:1995); German version EN ISO 2398:1997 |
| DIN EN ISO 3861-1997 | 喷砂橡胶软管.规范 | Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995); German version EN ISO 3861:1997 |
| DIN EN ISO 3994-2000 | 塑料软管.给排含水物质用螺旋热塑塑料增强的热塑塑料软管.规范 | Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:1998); German version EN ISO 3994:2000 |
| DIN EN ISO 4023-1995 | 蒸汽用橡胶软管.试验方法 (ISO 898-7:1992); 德文版本 EN 20898-7:1995 | Rubber hoses for steam - Test methods (ISO 4023:1991); German version EN ISO 4023:1995 |
| DIN EN ISO 4080-1995 | 橡胶和塑料软管和软管组件.透气性测定 (ISO 4080:1991); 德文版本 EN ISO 4080:1995 | Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:1991); German version EN ISO 4080:1995 |
| DIN EN ISO 4671-2000 | 橡胶和塑料软管及软管组件.尺寸测量方法 | Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions (ISO 4671:1999); German version EN ISO 4671:2000 |
| DIN EN ISO 4672-1999 | 橡胶和塑料软管.低于室温的柔性试验 | Rubber and plastics hoses - Sub-ambient temperature flexibility tests (ISO 4672:1997); German version EN ISO 4672:1999 |
| DIN EN ISO 5771-1996 | 输送无水氨用橡胶软管和软管组件.规范 | Rubber hose and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:1994, including Corr 1:1995); German version EN ISO 5771:1996 |
| DIN EN ISO 5774-2000 | 压缩空气用织物增强塑料软管.规范 | Plastics hoses, textile-reinforced, for compressed air - Specification (ISO 5774:1997); German version EN ISO 5774:2000 |
| DIN EN ISO 6134-2006 | 饱和蒸汽用橡胶软管和软管组件.规范(ISO 6134-2005).德文版本 EN ISO 6134-2005 | Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2005); German version EN ISO 6134:2005 |
| DIN EN ISO 6224-1997 | 带织物加固内衬的橡胶供水软管.规范 | Plastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:1995); German version EN ISO 6224:1997 |
| DIN EN ISO 6803-1997 | 橡胶和塑料软管及软管组件.无弯曲液压压力脉冲试验 | Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994); German version EN ISO 6803:1997 |
| DIN EN ISO 6806-1996 | 油燃烧器软管和软管组件.规范 | Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:1992); German version EN ISO 6806:1995 |
| DIN EN ISO 6807-2004 | 旋转式钻探和振动装置用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO 6807:2003); German version EN ISO 6807:2003 |
| DIN EN ISO 6808-2000 | 给排油用塑料软管及软管组件.规范 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:1999); German version EN ISO 6808:2000 |
| DIN EN ISO 6945-2000 | 橡胶软管.外覆层耐磨性的测定 | Rubber hoses - Determination of abrasion resistance of the outer cover (ISO 6945:1991) (including Amendment A1); German version EN ISO 6945:1996 + A1:2000 |
| DIN EN ISO 7233-1995 | 橡胶和塑料软管和软管组件.吸入阻力测定 (ISO 7233:1991); 德文版本 EN ISO 7233:1995 | Rubber and plastics hoses and hose assemblies - Determination of suction resistance (ISO 7233:1991); German version EN ISO 7233:1995 |
| DIN EN ISO 7369-2005 | 管道工程.金属软管和软管组件.词汇 | Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2004); Trilingual version EN ISO 7369:2004 |
| DIN EN ISO 7662-1996 | 橡胶和塑料软管.内衬磨损测定 | Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988); German version EN ISO 7662:1996 |
| DIN EN ISO 7751-1997 | 橡胶和塑料软管及软管组件.试验压力和爆破压力与设计工作压力的比值 (ISO 7751:1991); 德文版本 EN ISO 775 | Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991); German version EN ISO 7751:1997 |
| DIN EN ISO 7840-2004 | 小艇.耐火燃油软管 | Small craft - Fire resistant fuel hoses (ISO 7840:2004); German version EN ISO 7840:2004 |
| DIN EN ISO 8028-2000 | 真空喷漆用橡胶和/或塑料软管组件.规范 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999); German version EN ISO 8028:2000 |
| DIN EN ISO 8030-1998 | 橡胶和塑料软管.易燃烧性试验方法 | Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995); German version EN ISO 8030:1997 |
| DIN EN ISO 8031-1997 | 橡胶和塑料软管及软管组件.电阻测定 | Rubber and plastics hoses and hose assemblies - Determination of electrical resistance (ISO 8031:1993); German version EN ISO 8031:1997 |
| DIN EN ISO 8032-1999 | 橡胶和塑料软管组件.结合液压脉冲试验的软管弯曲试验(半Ω 型弯曲试验) | Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997); German version EN ISO 8032:1999 |
| DIN EN ISO 8033-2006 | 橡胶和塑料软管.元件间附着力的测定(ISO 8033:2006) | Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2006); English version of DIN EN ISO 8033:2006-11 |
| DIN EN ISO 8308-1996 | 橡胶和塑料软管及管系.软管和管壁的透液量测定 | Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:1993); German version EN ISO 8308:1995 |
| DIN EN ISO 8330-2000 | 橡胶和塑料软管和软管组件.词汇 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:1998); German version EN ISO 8330:2000 |
| DIN EN ISO 8469-2006 | 小型船舶.非耐火燃料软管 (ISO 8469-2006) | Small craft - Non-fire-resistant fuel hoses (ISO 8469:2006); English version of DIN EN ISO 8469:2006-10 |
| DIN EN ISO 8580-1995 | 橡胶和塑料软管.静定状态下抗紫外线的测定 (ISO 8580:1987); 德文版本 EN ISO 8580:1995 | Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions (ISO 8580:1987); German version EN ISO 8580:1995 |
| DIN ISO 10502-1997 | 航空航天.温度为230℃以下气压为10500KPa时使用的聚四氟乙烯(PTFE)软管.采购规范 | Aerospace - Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10500 kPa - Procurement specification (ISO 10502:1992) |
| DIN ISO 12151-2-2004 | 液压传动和通用连接件.软管接头.第2部分:带ISO 8434-1和8434-4 24°锥形连接件末端和O形圈的软管接头 | Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003) |
| DIN ISO 12151-3-2004 | 液压传动和通用连接件.软管接头.第3部分:带ISO 6162法兰末端的软管接头 | Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends (ISO 12151-3:1999) |
| DIN ISO 6772-1996 | 航空航天.流体系统.液压软管、管道和连接组件的脉冲试验 (ISO 6772:1988) | Aerospace - Fluid systems - Impulse testing of hydraulic hose, tubing and fitting assemblies (ISO 6772:1988) |
| DIN ISO 7258-1987 | 航空航天.航空航天用聚四氟乙烯(PTFE)软管.密度和相对密度的测定方法.与ISO7258, 1984相同 | Aerospace; polytetrafluoroethylene (PTFE) tubing for aerospace applications; methods for the determination of the density and relative density; identical with ISO 7258, edition 1984 |
| DIN V 65900-13-1998 | 航空航天系列.液体和气体用的柔性软管和软管组件的设计及制造.安装 | Aerospace series - Design and construction of flexible hoses and hose assemblies for fluids in liquid and gaseous condition - Installation (AECMA Technical Report TR 2675:1996 + Corrigendum 1997) |
欧洲软管标准(EN hose standards)
| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| EN 1113-1997 | 卫生水龙头用淋浴设备软管（PN10） | Showers hoses for (PN 10) sanitary tapware |
| EN 12083-1998+AC-2000 | 呼吸保护装置 带呼吸软管的过滤器（无面罩式过滤器） 微粒过滤器、气体过滤器和混合式过滤器 要求、试验 | Respiratory protective devices - Filters with breathing hoses (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking |
| EN 12115-1999 | 液体或气体化学药品用的橡胶和热塑软管和软管组件 规范 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
| EN 12374-1998 | 包装 软管 术语 | Packaging - Flexible tubes - Terminology |
| EN 12377-1998 | 包装 软管 封闭气密性的试验方法 | Packaging - Flexible tubes - Test method for the airtightness of closures |
| EN 12434-2000+AC-2001 | 低温容器 低温软管 | Cryogenic vessels - Cryogenic flexible hoses |
| EN 1256-1996 | 气焊设备 焊接切割及类似加工设备的软管附件规范 | Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
| EN 1327-1996 | 气焊设备 焊接和相关工艺用热塑软管 | Gas welding equipment - Thermoplastic hoses for welding and allied processes |
| EN 13482-2001 | 沥青用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
| EN 1360-1996 | 受测燃料配制用橡胶软管和软管部件 规范 | Rubber hoses and hose assemblies for measured fuel dispensing - Specification |
| EN 1361-1997 | 飞行燃油处理用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for aviation fuel handling - Specification |
| EN 13765-2003 | 输送烃类溶剂和化学制品的热塑性多层（非硫化）软管和软管组件 规范 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
| EN 13766-2003 | 输送烃类溶剂和化学制品的热塑性多层（非硫化）软管和软管组件 规范 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
| EN 138-1994 | 呼吸保护装置 与全罩式面罩、半罩式面罩或口罩一起使用的新鲜空气软管呼吸器 要求、测试、标志 | Respiratory protective devices - Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly - Requirements, testing, marking |
| EN 13905-2003 | 卫生座便器用低阻力喷射排水软管 | Low resistance shower hoses for sanitary tapware |
| EN 1736-2000 | 制冷系统和热泵 软管元件 振动隔离器和伸缩接头 要求、设计和安装 | Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation |
| EN 1761-1999 | 燃料卡车送货用的橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for fuel truck delivery - Specification |
| EN 1762-1997 | 气压为25bar(2.5MPa)及以下的液化石油气LPG(液相或气相)及天然气用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
| EN 1765-1997 | 油的吸放装置用橡胶软管组装件 组装件规范 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
| EN 1947-2002 | 消防软管 水泵及车辆用半刚性输送水软管组装件 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| EN 24641-1993 | 给水和排水用橡胶软管 规范 | Rubber hoses for water and discharge; specification (ISO 4641:1991) |
| EN 26801-1993 | 橡胶或塑料软管 容积膨胀的测定 | Rubber or plastics hoses-Determination of volumetric expansion (ISO 6801:1983) |
| EN 26802-1993 | 钢丝增强的橡胶和塑料软管及软管件 弯抗冲击试验 | Rubber and plastics hoses and hose assemblies, wire reinforced- Hydraulic impulse test with flexing (ISO 6802:1991) |
| EN 269-1994 | 呼吸保护装置 包括护罩的动力推动新鲜空气软管呼吸器 要求、测试、标志 | Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing, marking |
| EN 271-1995+A1-2000+AC1997 | 呼吸保护装置 用于喷砂操作的包括护罩的压缩空气导管呼吸器或动力推动新鲜空气软管呼吸器 要求、测试、标 | Respiratory protective devices - Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations - Requirements, testing, marking |
| EN 27326-1993 | 橡胶和塑料软管 静态条件下耐臭氧性的评定 | Rubber and plastics hoses-Assessment of ozone resistance under static conditions (ISO 7326:1991) |
| EN 28029-1993 | 塑料软管 通用型可折叠织物增强输水软管 规范 | Plastics hose-General purpose collapsible water hose, textile reinforced-Specification (ISO 8029:1985) |
| EN 28033-1993 | 橡胶和塑料软管 部件间粘合强度的测定 | Rubber and plastic hoses-Determination of adhesion between components (ISO 8033:1991) |
| EN 29168-1994 | 手持式牙科器械 软管连接件 | Dental handpieces - Hose connectors (ISO 9168:1991) |
| EN 559-2003 | 气焊设备 焊接、切割和同类处理用橡胶软管 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes |
| EN 560-1994 | 气焊设备 焊接、切割和同类处理用设备的软管连接 | Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes |
| EN 60684-2-1997+A1-2003 | 绝缘软管 第2部分：试验方法 | Flexible insulating sleeving - Part 2: Methods of test (IEC 60684-2:1997) |
| EN 60684-3-100 bis 105-2001 | 绝缘软管 第3部分：各种型号软管规范 活页100至105：挤压聚氯乙烯(PVC)软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 100 to 105: Extruded PVC sleeving (IEC 60684-3-100 to 105:2001) |
| EN 60684-3-121 bis 124-2001 | 绝缘软管 第3部分：各种型号软管规范 活页121至124：挤压有机硅软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 121 to 124: Extruded silicone sleeving (IEC 60684-3-121 to 124:2001) |
| EN 60684-3-145 bis 147-2001 | 绝缘软管 第3部分：各种型号软管规范 活页145至147：挤压聚四氟乙烯(PTFE)软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 145 to 147: Extruded PTFE sleeving (IEC 60684-3-145 to 147:2001) |
| EN 60684-3-151-1998 | 绝缘软套管 第3部分：单型套管的特殊要求活页151：通用挤压PVC／晴橡胶软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose (IEC 60684-3-151:1998) |
| EN 60684-3-217-1998 | 绝缘软管 第3部分：单型套管的特殊要求 活页217：热缩聚烯烃套管 阻燃 收缩比3：1 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 217: Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 3:1 (IEC 60684-3-217:1998) |
| EN 60684-3-218-1998 | 绝缘软管 第3部分：单型套管的特殊要求 活页218：.热缩聚烯烃套管 不阻燃 手缩比3：1 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 218: Heat-shrinkable polyolefine sleeving, not flame retarded, shrink ratio 3:1 (IEC 60684-3-218:1998) |
| EN 60684-3-228-1998 | 绝缘软管 第3部分：各种型号软管规范 活页228：热缩半刚性聚偏二氟乙烯套管 阻燃 耐流体 收缩率2：1 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-228:1998) |
| EN 60684-3-233-1998 | 绝缘软管 第3部分 各种型号套管的规范要求 活页２３３：热收缩氟弹性体软管 阻燃 耐流体 收缩比２： | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-233:1998) |
| EN 60684-3-246-2002 | 绝缘软管 第3部分：各种型号套管的规范要求 活页２４６：聚烯烃不阻燃双层壁热收缩套管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 246: Heat-shrinkable polyolefin sleeving, dual-wall, not flame-retarded (IEC 60684-3-246:2001) |
| EN 60684-3-271-1998 | 绝缘软管 第3部分：各种型号套管的规范 活页271：热收缩弹性软管 阻燃 耐流体 收缩比2：1 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-271:1998) |
| EN 60684-3-272-1998 | 绝缘软管 第3部分：各种型号软管规范 活页272：热收缩弹性软管 阻燃 耐流体 收缩比2：1 薄壁 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 272: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1, thin wall (IEC 60684-3-272:1998) |
| EN 60684-3-409-1999 | 绝缘软套管 第3部分：各种型号套管规范 活页409：聚胺脂(PUR)涂覆层的玻璃纤维软管 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating (IEC 60684-3-409:1999) |
| EN 61479-2001 | 带电作业 绝缘材料制软导线外皮(线软管) | Live working - Flexible conductor covers (line hoses) of insulating material (IEC 61479:2001) |
| EN 61770-1999 | 与总水管连接的电气器具 避免软管组件的反虹吸和失效 | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets (IEC 61770-1998) |
| EN 739-1998+A1-2002 | 医疗气体设备用低压软管组件 | Low-pressure hose assemblies for use with medical gases |
| EN 853-1996 | 橡胶软管和软管配件 金属丝编织加强液压型 规范 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| EN 854-1996 | 橡胶软管和软管配件 纺织增强液压型 规范 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| EN 855-1996 | 塑料软管和软管配件 热塑料织物增强液压型 规范 | Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification |
| EN 856-1996 | 橡胶软管和软管配件 橡胶 包覆螺形线增强液压型 规范 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
| EN 857-1996 | 橡胶软管和软管配件 液压设备用金属丝编织增强压制型 规范 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
| EN ISO 10380-2003 | 管道系统 波纹金属软管和软管组件 | Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2003) |
| EN ISO 10960-1996 | 橡胶和塑料软管 动态条件下耐臭氧性的评定 | Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:1994) |
| EN ISO 11758-1997+AC-1998 | 橡胶和塑料软管 氙弧灯照射 颜色和外观变化的测定 | Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance (ISO 11758:1995) |
| EN ISO 1307-1995 | 一般工业用橡胶和塑料软管 孔径和公差及长度公差 | Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length (ISO 1307:1992) |
| EN ISO 13628-2-2000 | 石油和天然气工业 水下采油系统的设计和操作 第2部分：海底和海洋设备用软管系统 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications (ISO 13628-2:2000) |
| EN ISO 1401-1999 | 农业喷雾用橡胶软管 | Rubber hoses for agricultural spraying (ISO 1401:1999) |
| EN ISO 1402-1996 | 橡胶和塑料软管和软管组件 液压试验 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994) |
| EN ISO 1403-1997 | 一般用途的输水橡胶软管 规范 | Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:1995) |
| EN ISO 14113-1997 | 气焊设备 最大设计压力为450bar的压塑空气和液化气用橡胶和塑料软管组件 | Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997) |
| EN ISO 15540-2001 | 船舶与造船技术 软管组件耐火性 试验方法 | Ships and marine technology - Fire resistance of hose assemblies - Test methods (ISO 15540:1999) |
| EN ISO 15541-2001 | 船舶与造船技术 软管组件耐火性 试验台技术要求 | Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999) |
| EN ISO 1746-2000 | 橡胶或塑料软管和管件 弯曲试验 | Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including technical corrigendum 1:1999) |
| EN ISO 2398-1997 | 织物增强的压缩空气用橡胶软管 规范 | Rubber hose, textile-reinforced, for compressed air - Specification (ISO 2398:1995) |
| EN ISO 3861-1997 | 喷砂用橡胶软管 规范 | Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995) |
| EN ISO 3994-2000 | 塑料软管 给排水用螺纹型热塑性软管 规范 | Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:1998) |
| EN ISO 4023-1995 | 蒸气胶管 试验方法 | Rubber hoses for steam - Test methods (ISO 4023:1991) |
| EN ISO 4080-1995+AC-1998 | 橡胶与塑料软管和软管组件 漏气氯的测定 | Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:1991) |
| EN ISO 4671-2000 | 橡胶和塑料软管和软管组件 尺寸测量方法 | Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions (ISO 4671:1999) |
| EN ISO 4672-1999 | 橡胶和塑料软管 低温的弯曲试验 | Rubber and plastics hoses - Sub-ambient temperature flexibility tests (ISO 4672:1997) |
| EN ISO 5771-1996 | 输送无水氨用橡胶软管和软管组件 规范 | Rubber hose and hose assemblies for transferring anhydrous ammonia - Specification (including Corr 1:1995) |
| EN ISO 5774-2000 | 压缩空气用织物增强的塑料软管 规范 | Plastics hoses, textile-reinforced, for compressed air - Specification (ISO 5774:1997) |
| EN ISO 6224-1997 | 一般用途输水用织物增强塑料软管 规范 | Plastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:1995) |
| EN ISO 6803-1997 | 橡胶或塑料软管和软管组件 无弯曲的液压脉冲试验 | Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994) |
| EN ISO 6806-1995 | 油燃烧器用软管和软管组件 规范 | Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:1992) |
| EN ISO 6808-2000 | 给排油用塑料软管和软管组件 规范 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:1999) |
| EN ISO 6945-1996+A1-2000 | 橡胶软管 外覆层耐磨性的测定 | Rubber hoses - Determination of abrasion resistance of the outer cover (ISO 6945:1991) |
| EN ISO 7233-1995 | 橡胶和塑料软管和软管组件 耐真空性能测定 | Rubber and plastics hoses and hose assemblies - Determination of suction resistance (ISO 7233:1991) |
| EN ISO 7662-1996 | 橡胶和塑料软管 衬里耐磨性的测定 | Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988) |
| EN ISO 7751-1997 | 橡胶和塑料软管和软管组件 试验压力和爆破压力对设计工作压力的比值 | Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991) |
| EN ISO 7840-1995+A1-2000 | 小艇 耐火燃油软管 | Small craft - Fire resistant fuel hoses (ISO 7840:1994) |
| EN ISO 8028-2000 | 真空喷涂漆用橡胶和／或塑料软管和软管组件 规范 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999) |
| EN ISO 8030-1997 | 橡胶和塑料软管 易燃烧性试验方法 | Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995) |
| EN ISO 8031-1997 | 橡胶和塑料软管和软管组件 电阻率测定 | Rubber and plastics hoses and hose assemblies - Determination of electrical resistance (ISO 8031:1993) |
| EN ISO 8032-1999 | 橡胶和塑料软管和软管组件 液压脉冲弯曲试验(半欧姆型试验) | Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997) |
| EN ISO 8308-1995 | 橡胶和塑料软管和管件 液体透过管壁性能测定 | Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:1993) |
| EN ISO 8330-2000 | 橡胶和塑料软管和软管组件 词汇 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:1998) |
| EN ISO 8469-1995+A1-2000 | 小艇 非耐火燃油软管 | Small craft - Non-fire resistant fuel hoses (ISO 8469:1994) / Note: To be replaced by prEN ISO 8469 (2003-09). |
| EN ISO 8580-1995 | 橡胶与塑料软管 稳定状态下耐紫外线的测定 | Rubber and plastic hoses - Determination of ultra-violet resistance under static conditions (ISO 8580:1987) |
| HD 523.3.201 S1-1993 | 绝缘软管规范 第3部分：各种型号软管的规范要求 活页201：通用软交联聚氯乙烯热收缩软管，收缩比为2：1 | Specification for flexible insulation sleeving; part 3: specification requirements for individual types of sleeving; sheet 201: heat shrinkable sleeving, general purpose, flexible, cross-linked PVC, shrink ratio 2:1 (IEC 60684-3-201:1991) |
| prEN 10324-2001 | 钢丝和钢丝制品 软管增强用钢丝 | Steel wire and wire products - Hose reinforcement wire |
| prEN 13483-2002 | 测量加油机用带内部蒸汽回收的软管及软管组件 规范 | Hoses and hose assemblies with internal vapour recovery for measured fuel dispensing system - Specification |
| prEN 1361-2001 | 飞行燃油处理用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for aviation fuel handling - Specification |
| prEN 13618-2003 | 供水挠性软管（金属的和弹性材料） 规范和试验方法 | Water supply - Flexible hoses (elastomeric or plastic material hose with or without metallic or synthetic braiding) - Product standard |
| prEN 14420-1-2002 | 带夹具的软管配件 第1部分：试验和名称、测量、要求 | Hose fittings with clamp units - Part 1: Requirements, survey, designation and testing |
| prEN 14420-10-2002 | 带夹具的软管配件 第10部分：凸轮锁紧连接规格 | Hose fittings with clamp units - Part 10: Gauges for cam-locking couplings |
| prEN 14420-11-2002 | 带夹具的软管配件 第11部分： 对称半连接规格（圭勒明方法） | Hose fittings with clamp units - Part 11: Gauges for symmetrical half couplings (Guillemin system) |
| prEN 14420-2-2002 | 带夹具的软管配件 第2部分：软管支架的软管附属部分 尺寸和类型 | Hose fittings with clamp units - Part 2: Hoses side parts of hose shank; Dimensions and types |
| prEN 14420-3-2002 | 带夹具的软管配件 第3部分：销式或螺栓式夹具 | Hose fittings with clamp units - Part 3: Clamp units, pinned or bolted |
| prEN 14420-4-2002 | 带夹具的软管配件 第4部分：法兰连接 | Hose fittings with clamp units - Part 4: Flange connections |
| prEN 14420-5-2002 | 带夹具的软管配件 第5部分：螺纹连接 | Hose fittings with clamp units - Part 5: Threaded connections |
| prEN 14420-6-2002 | 带夹具的软管配件 第6部分：：TW罐式卡车连接 | Hose fittings with clamp units - Part 6: TW tank truck couplings |
| prEN 14420-7-2002 | 带夹具的软管配件 第7部分：凸轮锁紧 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| prEN 14420-8-2002 | 带夹具的软管配件 第8部分：对称半连接（圭勒明方法） | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
| prEN 14420-9-2002 | 带夹具的软管配件 第9部分：TW罐式卡车连接规格 | Hose fittings with clamp units - Part 9: Gauges for TW tank truck couplings |
| prEN 14421-2002 | 卷缩和弯曲的软管口和金属环 | Hose tail and ferrule for crimping and swaging |
| prEN 14422-2002 | 液化石油气软管用夹具型连接组件 | Clamp type coupling assemblies for LPG transfer hoses |
| prEN 14423-2002 | 额定压力达18bar在DN15-DN50的蒸气软管用夹具型连接组件 | Clamp type coupling assemblies for use with DN 15 to DN 50 steam hoses rated for pressures up to 18 bar |
| prEN 14424-2002 | 带螺纹箍的软管配件 | Hose fittings with screwed ferrules |
| prEN 14454-2002 | 饮用水的防回流污染装置 包括公称压力在DN15-DN32内的软管组合流阻止器 H族 A型 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 inclusive - Family H, Type A |
| prEN 1762-2003 | 气压为25bar(2.5MPa)液化石油气LPG(液相或气相)及天然气用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification / Note: Intended as replacement for EN 1762 (1997-10). |
| prEN 1763-2-2000 | 供气相丙烷和丁烷使用的挠性软管、管道及组装件 第2部分：对管咀接头及组装件的要求 | Flexible hose, tubing and assemblies for use with propane and butane in the vapour phase - Part 2: Requirements for nozzles, couplings and assemblies |
| prEN 1765-2001 | 油的吸放装置用橡胶软管组装件 组装件规范 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
| prEN 1924-2003 | 用于急救软管设备的不渗透吹塑软管 | Fire-fighting hoses - Non-percolating layflat delivery hoses and hose assemblies for pumps and vehicles |
| prEN 3086-1998 | 航空航天系列 软管系统 符号表示到15位 | Aerospace series - Hose assemblies - Designation limited to 15 digits |
| prEN 60684-3-214-2000 | 绝缘软套管 第3部分：各种型号软管规范 活页214：热缩聚烯烴软管 不阻燃 收缩比3：1厚壁和中厚壁 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, shrink ratio 3:1; Thick and medium wall |
| prEN 60684-3-216-2000 | 绝缘软套管 第3部分：各种型号软管规范 活页216：热缩 阻燃 有限着火危险软管 | IEC 60684-3-216: Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 216: Heat-shrinkable, flame-retarded, limited fire hazard sleeving |
| prEN ISO 15465-2002 | 管道工程 条绕金属软管和软管组件 | Pipework - Stripwound metal hoses and hose assemblies (ISO/DIS 15465:2002) |
| prEN ISO 6134-1999 | 饱和水蒸汽橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for saturated steam - Specification (ISO/DIS 6134:1999) |
| prEN ISO 6807-2003 | 旋转式钻探和振动用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO/FDIS 6807:2003) |
| prEN ISO 7369-2002 | 管道工程 金属软管和软管装备 词汇 | Pipework - Metal hoses and hose assemblies - Vocabulary (ISO/DIS 7369:2002) |
中国软管标准(GB hose standards)
| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| FZ/T 93051-1998 | 前纺和细纱机械上罗拉包覆物--胶管 | () |
| GB 10543-2003 | 飞机地面加油和排油用橡胶软管及软管组合件 | Rubber hose and hose assemblies for aircraft ground fuelling and defuelling |
| GB 15090-2005 | 消防软管卷盘 | Fire hose reel |
| GB 16897-1997 | 制动软管 | Brake hose |
| GB 20414-2006 | 机动车用液化石油气的橡胶软管和软管组合件 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles―Specification |
| GB 20689-2006 | 分配液化石油气（LPGs)用橡胶软管及软管组合件规范 | Rubber hoses and hose assemblies for dispensing liquefied petroleum gases(LPGs) - Specification |
| GB 4491-2003 | 橡胶输血胶管 | Rubber transfusion tubes |
| GB 6969-2005 | 消防吸水胶管 | Rubber suction hose for fire-flighting purpose |
| GB 7128-1986 | 汽车气压制动胶管 | Rubber hose for automotive air brake system |
| GB 7542-2003 | 铁路机车车辆制动用橡胶软管 | Rubber brake hoses for railway locomotive and car |
| GB/T 10541-2003 | 近海停泊排吸油橡胶软管 | Rubber hose，oil suction and discharge，offshore mooring |
| GB/T 10544-2003 | 钢丝缠绕增强外覆橡胶的液压橡胶软管和软管组合件 | Rubber hoses and hose assemblies--Rubber-covered，spiral wire reinforced，hydraulic type |
| GB/T 10546-2003 | 液化石油气(LPG)用橡胶软管和软管组合件散装输送用 | Rubber hoses and hose assemblies for liquefied petroleum gases(LPG)--Bulk transfer application |
| GB/T 11182-2006 | 橡胶软管增强用钢丝 | Steel wire for rubber hose reinforcement |
| GB/T 1186-2007 | 压缩空气用织物增强橡胶软管 | Rubber hoses,textile-reinforced,for compressed air-Specification |
| GB/T 12721-2007 | 橡胶软管 外覆层耐磨耗性能的测定 | Rubber hoses - Determination of abrasion resistance of the outer cover |
| GB/T 12722-1991 | 橡胶和塑料软管组合件屈挠液压脉冲试验(半Ω试验) | Rubber and plastics hose assemblies--Flexing combined with hydraulic impulse test (Half omega test) |
| GB/T 12756-1991 | 胶管用钢丝绳 | Steel wire ropes for rubber hose |
| GB/T 14525-1993 | 波纹金属软管通用技术条件 | General specification for corrugated metallichose assemblies |
| GB/T 14652.1-2001 | 小艇耐火燃油软管 | Small craft--Fire-resistant fuel hoses |
| GB/T 14652.2-2001 | 小艇非耐火燃油软管 | Small craft--Non-fire-resistant fuel hoses |
| GB/T 14904-1994 | 钢丝增强的橡胶、塑料软管和软管组合件屈挠液压脉冲试验 | Rubber and plastics hose and hose assemblies--Wire reinforced--Hydraulic impulse test with flexing |
| GB/T 14905-1994 | 橡胶和塑料软管各层间粘合强度测定 | Rubber and plastics hose--Determination of adhesion between components |
| GB/T 15329.1-2003 | 橡胶软管及软管组合件织物增强液压型第1部分:油基流体用 | Rubber hosesand hose assemblies--Textile-reinforced hydraulic types--Specification--Part 1: Oil-based fluid applications |
| GB/T 15907-1995 | 橡胶、塑料软管燃烧试验方法 | Rubber and plastics hoses--Method of testfor flammability |
| GB/T 15908-1995 | 织物增强液压型热塑性塑料软管和软管组合件 | Plastics hose and hose assemblies--Thermoplastics，textile-reinforced，hydraulic type |
| GB/T 16591-1996 | 输送无水氨用橡胶软管及软管组合件 | Rubber hose and hose assemblies for transferring anhydrous ammonia |
| GB/T 16693-1996 | 软管快速接头 | Quick hose’s connection |
| GB/T 17604-1998 | 橡胶管道接口用密封圈制造质量的建议疵点分类与类别 | Rubber--Recommendations for the workmanship of pipe joint rings--Description and classification of imperfections |
| GB/T 18422-2001 | 橡胶和塑料软管及软管组合件透气性的测定 | Rubber and plastics hoses andhose assemblies--Determination of permeability to gas |
| GB/T 18423-2001 | 橡胶和塑料软管及非增强软管液体壁透性测定 | Rubber and plastics hoses and tubing--Determination of transmission of liquids through hose and tubing walls |
| GB/T 18424-2001 | 橡胶和塑料软管氙弧灯曝晒颜色和外观变化的测定 | Rubber and plastics hoses--Exposure to a xenon arc lamp--Determination of changes in colour andappearance |
| GB/T 18425-2001 | 蒸汽橡胶软管试验方法 | Rubber hoses for steam--Test methods |
| GB/T 18615-2002 | 波纹金属软管用非合金钢和不锈钢接头 | Non-alloyed and stainless steel fittings for corrugated flexible metallic hoses |
| GB/T 18616-2002 | 爆炸性环境保护电缆用的波纹金属软管 | Corrugated flexible metallic hose assmeblies for the protection of electrical cables in explosive atomspheres |
| GB/T 18947-2003 | 矿用钢丝增强液压软管及软管组合件 | Rubber hoses and hose assemblies for underground mining--Wire-reinforced hydraulic type |
| GB/T 18948-2003 | 轿车和轻型商用车辆冷却系统用纯胶管和橡胶软管 | Rubber--Coolant hoses and tubing for use on private cars and light commercial vehicles--Specification |
| GB/T 18948-2003 | 轿车和轻型商用车辆冷却系统用纯胶管和橡胶软管 | Rubber--Coolant hoses and tubing for use on private cars and light commercial vehicles--Specification |
| GB/T 18949-2003 | 橡胶和塑料软管动态条件下耐臭氧性能的评定 | Rubber and plastics hoses--Assessment of ozone resistance under dynamic conditions |
| GB/T 18950-2003 | 橡胶和塑料软管静态下耐紫外线性能测定 | Rubber and plastics hoses--Determination of ultra-violet resistance under static conditions |
| GB/T 19090-2003 | 矿用输送空气和水的织物增强橡胶软管及软管组合件 | Rubber hoses and hose assemblies for underground mining--Textile-reinforced air and water type |
| GB/T 20023-2005 | 无气喷涂用橡胶和/或塑料软管及软管组合件 | Rubber and/or plastics hoses and hoses assemblies for airless paint spraying |
| GB/T 20024-2005 | 内燃机用橡胶和塑料燃油软管可燃性试验方法 | Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability |
| GB/T 20025.2-2005 | 汽车空调用橡胶和塑料软管及软管组合件耐制冷剂134a | Rubber and plastics hoses and hose assemblise for automotive air conditioning -- Refrigerant 134a |
| GB/T 20026-2005 | 橡胶和塑料软管内衬层耐磨性测定 | Rubber and plastics hose -- Determination of abrasion of lining |
| GB/T 20461-2006 | 汽车动力转向系统用橡胶软管和软管组合件规范 | Rubber hoses and hose assemblies for automobile power-steering systems ―Specification |
| GB/T 20462.1-2006 | 汽车用热塑性非增强软管和软管第1部分: 非燃油用 | Thermoplastic tubing and hoses for automotive use―Part 1： Non-fuel applications |
| GB/T 20462.2-2006 | 汽车用热塑性非增强软管和软管 第2部分： 石油基燃油用 | Thermoplastic tubing and hoses for automotive use―Part 2：Petroleum-based-fuel applications |
| GB/T 21400.2-2008 | 绞盘式喷灌机 第2部分: 软管和接头 试验方法 | () |
| GB/T 21476-2008 | 船舶与海上技术 软管组件的耐火性能 试验台要求 | () |
| GB/T 21477-2008 | 船舶及海上技术 软管组件的耐火性能 试验方法 | () |
| GB/T 2351-2005 | 液压气动系统用硬管外径和软管内径 | Fluid power systems and components-Connectors and associated components-Nominal outside diameters of tubes and nominal inside diameters of hoses |
| GB/T 2550-2007 | 气体焊接设备 焊接、切割和类似作业用橡胶软管 | Gas welding equipment - Rubber hose for welding, cutting and allied processes |
| GB/T 3683.1-2006 | 橡胶软管及软管组合件钢丝编织增强液压型规范第1部分：油基流体适用 | Rubber hoses and hose assemblies―wire-braid-reinforced hydraulic types―specification―Part 1：Oil-based fluid applications |
| GB/T 5009.79-2003 | 食品用橡胶管卫生检验方法 | Hygienic analysis method of rubber hose for food use |
| GB/T 5107-1985 | 焊接和切割用软管接头 | Hose connection for equipment for welding and cutting |
| GB/T 5563-2006 | 橡胶和塑料软管及软管组合件 静液压试验方法 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing |
| GB/T 5564-2006 | 橡胶及塑料软管 低温曲挠试验 | Rubber and plastics hoses - Subambient temperature flexibility tests |
| GB/T 5565-2006 | 橡胶或塑料增强软管和非增强软管 弯曲试验 | Rubber or plastics hoses tubing - Bending tests |
| GB/T 5566-2003 | 橡胶或塑料软管耐压扁试验方法 | Rubber or plastics hoses--Test method for crush resistance |
| GB/T 5567-2006 | 橡胶和塑料软管及软管组合件 耐吸扁性能的测定 | Rubber and plastics hoses and hose assemblies - Determination of suction resistance |
| GB/T 5568-2006 | 橡胶或塑料软管及软管组合件 无挠曲液压脉冲试验 | Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without flexing |
| GB/T 7113-2003 | 绝缘软管定义和一般要求 | Flexible insulating sleeving--Definitions andgeneral requirements |
| GB/T 7113.2-2005 | 绝缘软管 试验方法 | Flexible insulating sleeving Methods of test |
| GB/T 7127.1-2000 | 使用非石油基制动液的道路车辆液压制动系统用制动软管组合件 | Brake hose assemblies for hydraulic braking systems of road vehicles used with non-petroleum-base brake fluid |
| GB/T 7127.2-2000 | 使用石油基制动液的道路车辆液压制动系统用制动软管组合件 | Brake hose assemblies for hydraulic braking systems of road vehicles used with petroleum-base brake fluid |
| GB/T 7129-2001 | 橡胶或塑料软管容积膨胀的测定 | Rubber or plastics hoses--Determinationof volumetric expansion |
| GB/T 7528-2002 | 橡胶和塑料软管及软管组合件术语 | Rubber and plastics hoses and hose assemblies--Vocabulary |
| GB/T 7939-2008 | 液压软管总成 试验方法 | () |
| GB/T 9065.1-1988 | 液压软管接头连接尺寸扩口式 | Hydraulic fluid power--Hose connector--Connecting dimension (Part 1--Flare type) |
| GB/T 9065.2-1988 | 液压软管接头连接尺寸卡套式 | Hydraulic fluid power--Hose connector--Connecting dimension (Part 2--Insert type) |
| GB/T 9065.3-1988 | 液压软管接头连接尺寸焊接式或快换式 | Hydraulic fluid power--Hose connector--Connecting dimension (Part 3--Welding or quick-action type) |
| GB/T 9572-2001 | 橡胶和塑料软管及软管组合件电阻的测定 | Rubber and plastics hoses and hose assemblies--Determination of electrical resistance |
| GB/T 9573-2003 | 橡胶、塑料软管及软管组合件尺寸测量方法 | Rubber and plastics hose and hose assemblies--Methods of measurement of dimensions |
| GB/T 9574-2001 | 橡胶和塑料软管及软管组合件试验压力、爆破压力与设计工作压力的比率 | Rubber and plastics hoses and hose assemblies--Ratios of proof and burst pressure to design working pressure |
| GB/T 9575-2003 | 工业通用橡胶和塑料软管内径尺寸及公差和长度公差 | Rubber and plastics hoses for general-purpose industrial applications--Bore diameters and tolerances，and tolerances on length |
| GB/T 9576-2001 | 橡胶和塑料软管及软管组合件选择、贮存、使用和维护指南 | Rubber and plastics hose and hose assemblies--Guide to selection，use，and maintenance |
| GB/T 9577-2001 | 橡胶和塑料软管及软管组合件标志、包装和运输规则 | Rubber and plastics hose and hose assemblies--Rules for marking，package and transportation |
| GB/Z 18427-2001 | 液压软管组合件液压系统外部泄漏分级 | Hydraulic hose assembies--External leakage classification for hydraulic systems |
| HG 2486-1993 | 家用煤气软管 | () |
| HG/T 2183-1991 | 耐稀酸碱橡胶软管 | () |
| HG/T 2184-2008 | 通用输水织物增强橡胶软管 | () |
| HG/T 2185-1991 | 橡胶软管外观质量 | () |
| HG/T 2192-2008 | 喷砂用橡胶软管-规范 | () |
| HG/T 2193-2008 | 洗衣机和洗碗机橡胶软管和软管组合件 进水软管规范 | () |
| HG/T 2300-1992 | 织物增强可折叠式通用输水塑料软管 | () |
| HG/T 2301-2008 | 压缩空气用织物增强热塑性塑料软管 | () |
| HG/T 2490-1993 | 排吸泥橡胶软管 | () |
| HG/T 2491-1993 | 汽车用输水橡胶软管 | () |
| HG/T 2540-1993 | 内燃机车机油橡胶软管 | () |
| HG/T 2603-1994 | 双面胶管成型机 | () |
| HG/T 2718-1995 | 汽车空调用橡胶和塑料软管及软管组合件 | () |
| HG/T 3037-2008 | 计量分配燃油用橡胶和塑料软管及软管组合件 | () |
| HG/T 3038-2008 | 岸上排吸油橡胶软管 | () |
| HG/T 3039-2008 | 船/码头输油用橡胶软管 | () |
| HG/T 3042-1989 | 内燃机燃油系统输送常规液体燃油用橡胶软管和纯胶管 | () |
| HG/T 3042-1989 | 内燃机燃油系统输送常规液体燃油用橡胶软管和纯胶管 | () |
| HG/T 3045-2008 | 排吸用螺旋线增强的热塑性塑料软管 | () |
| HG/T 3324-1981 | 铁路蒸汽机车用给水胶管 | () |
| HG/T 3842-2006 | 消防用不可折叠型橡胶和塑料软管 第1部分:定位应急设施用轴卷半硬性软管 | () |
| JB/T 10637-2006 | 农林拖拉机和机具 高温低压输油胶管 | Rubberized Oil Tube of Hi-temperature and low pressure for Agriculture and forest tractor and machinery |
| JB/T 10708-2007 | 胶管接头扣压机 | () |
| JB/T 10759-2007 | 工程机械 高温高压液压软管总成 | Construction machinery-High temperature and high pressure hydraulic fluid power hose assemblies |
| JB/T 10799-2007 | 软管灌装封尾机 | Soft tube filling and sealing machine |
| JB/T 6015-2000 | 柴油机低压输油胶管 技术条件 | () |
| JB/T 6142.1-2007 | 锥密封钢丝编织胶管总成 | () |
| JB/T 6142.2-2007 | 锥密封90o钢丝编织胶管总成 | () |
| JB/T 6142.3-2007 | 锥密封双90o钢丝编织胶管总成 | () |
| JB/T 6142.4-2007 | 锥密封45o钢丝编织胶管总成 | () |
| JB/T 6143.1-2007 | 锥密封棉线编织胶管总成 | () |
| JB/T 6143.2-2007 | 锥密封90°棉线编织胶管总成 | () |
| JB/T 6143.3-2007 | 锥密封双90°棉线编织胶管总成 | () |
| JB/T 6143.4-2007 | 锥密封45°棉线编织胶管总成 | () |
| JB/T 6144.1-2007 | 锥密封胶管总成 锥接头 | () |
| JB/T 6144.2-2007 | 锥密封胶管总成 55°非密封管螺纹锥接头 | () |
| JB/T 6144.3-2007 | 锥密封胶管总成 55o密封管螺纹锥接头 | () |
| JB/T 6144.4-2007 | 锥密封胶管总成 60°密封管螺纹锥接头 | () |
| JB/T 6144.5-2007 | 锥密封胶管总成 焊接锥接头 | () |
| JB/T 6145-2007 | 钢丝、棉线编织胶管总成 | () |
| JB/T 8151.1-1999 | 绝缘软管规范 各种型号软管的规范要求 硅橡胶玻璃纤维软管 | () |
| JB/T 8151.2-1999 | 绝缘软管规范 各种型号软管的规范要求 聚氯乙烯玻璃纤维软管 | () |
| JB/T 8151.3-1999 | 丙烯酸酯玻璃纤维软管 | () |
| JB/T 8406-2008 | 工程机械 高温低压输油胶管 | () |
| JB/T 8512-1996 | 输水用涂塑软管 | () |
| JB/T 8727-2004 | 液压软管 总成 | () |
| JC 886-2001 | 卫生设备用软管 | () |
| MT 191-1989(2005) | 煤矿井下用橡胶管安全性能检验规范 | () |
| MT/T 98-2006 | 液压支架用软管及软管总成检验规范 | () |
| NF L43-582-1966 | 飞行器液体装置.橡胶管接头.(RECH.) | (AIRCRAFT FLUID INSTALLATIONS. CONNECTORS FOR RUBBER HOSE. (RECH.).) |
| NF L43-587-1973 | 橡胶管接头.ISO 米制螺纹剖面和公差 | (RUBBER HOSE CONNECTIONS. ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF T47-204-1969 | 橡胶.合成橡胶管或软管.用浸渍或接触法测定管抗液体作用的能力 | (RUBBER AND SIMILAR ELASTOMERS. RESISTANCE OF TUBES AND PIPES TO THE ACTION OF LIQUIDS BY CONTACT OR IMMERSION. (TESTING METHODS).) |
| QB/T 1822-1993 | 软管螺纹机 | () |
| QB/T 2026-1994 | 软管滚涂油墨 | () |
| QB/T 2901-2007 | 牙膏用铝塑复合软管 | Aluminium and plastic laminated tubing for toothpaste |
| QC/T 619-1999(2005) | B型和C型蜗杆传动式软管环箍 | () |
| QC/T 620-1999(2005) | A型蜗杆传动式软管环箍 | () |
| QC/T 664-2000(2005) | 汽车空调(HFC-134a)用软管及软管组合件 | () |
| QC/T 745-2006 | 液化石油气汽车橡胶管路 | Rubber pipelines for liquefied petroleum gas vehicles |
| QC/T 764-2006 | 汽车液压制动系 金属管、内外螺纹管接头和软管端部接头 | () |
| SB/T 10355-2002 | 制冷系统和热泵—软管件、隔振器和膨胀接头—要求、设计与安装 | () |
| XP D36-112-2000 | 家政学.使用汽缸或单个油箱里的丁烷或丙烷的家庭装置外部连接用(增强)挠性橡胶管 | (Household economy - (Reinforced) flexible rubber tubing for the external connection of domestic appliances using butane or propane from cylinders or individual tanks.) |
| XP D36-114-2000 | 家用经济.使用丙烷和丁烷的装置外连接用增强橡胶管 | (Household economy - (Reinforced) rubber tubing for the external connection of appliances using butane or propane.) |
| YB/T 023-1992(2005) | 金属软管用碳素钢冷轧钢带 | () |
| YB/T 5306-2006 | P3 型镀锌金属软管 | () |
| YB/T 5307-2006 | S型钎焊不锈钢金属软管 | () |
ISO软管标准(ISO hose standards)
| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| IEC 60684-2 Corrigendum 1-1997 | 绝缘软管.第2部分:试验方法 | Flexible insulating sleeving - Part 2: Methods of test |
| IEC 60684-2-1997 | 绝缘软管 第2部分:试验方法 | Flexible insulating sleeving - Part 2: Methods of test |
| IEC 60684-3-136 Corrigendum 1-1999 | 绝缘软管.第3部分:各种型号软管规范.活页136:通用挤压氟硅软管 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose |
| IEC 60684-3-136-1997 | 绝缘软管 第3部分:各种型号软管规范 活页136:通用挤压氟硅软管 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose |
| IEC 60684-3-151-1998 | 绝缘软管 第3部分:各种型号软管的规范 活页151:通用挤压PVC/腈橡胶软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose |
| IEC 60684-3-165-2004 | 绝缘软管.第3部分:各种型号软管的规范.活页165:阻燃型挤压聚烯烃有限火险软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving |
| IEC 60684-3-211-2007 | 绝缘软套管.第3部分:各种型号套管的规范.第211活页:收缩比率为2:1的半刚性聚烯烃热收缩软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1 |
| IEC 60684-3-212-2005 | 绝缘软管.第3部分:各种型号软管规范.活页212:热收缩聚烯烃软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings |
| IEC 60684-3-213-1998 | 绝缘软管 第3部分:各种型号套管规范 活页213:热收缩聚烯烃软管,不阻燃、收缩比2:1 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 213: Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2:1 |
| IEC 60684-3-214-2005 | 绝缘软管.第3部分:各种型号软管规范.活页214:阻燃、收缩比3:1的热收缩聚烯烃软管.厚壁和中厚壁 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 3:1 - Thick and medium wall |
| IEC 60684-3-216 Corrigendum 1-2003 | 绝缘软管.第3部分:各种型号软管规范.活页216:热缩、阻燃、耐火软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard sleeving |
| IEC 60684-3-216-2001 | 绝缘软管 第3部分：各种型号软管规范 活页216：热缩，阻燃，有限着火危险软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard sleeving |
| IEC 60684-3-217-1998 | 绝缘软管 第3部分:各种型号软管规范 活页217:热收缩聚烯烃软管,阻燃、收缩比3:1 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 217: Heat-shrinkable polyolefin sleeving, flame retarted, shrink ratio 3:1 |
| IEC 60684-3-218-1998 | 绝缘软管 第3部分:各种型号软管规范 活页218:热收缩聚烯烃软管,不阻燃、收缩比3:1 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 218: Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 3:1 |
| IEC 60684-3-228-2004 | 绝缘软管.第3部分:各种型号软管规范.活页228:阻燃、耐流体、收缩比2:1的热收缩、半硬质聚偏二氟乙烯软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
| IEC 60684-3-240 to 243-2002 | 绝缘软管.第3部分:各种型号软管规范.第240至243篇:热收缩聚四氟乙烯(PTFE)绝缘软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 240 to 243: Heat-shrinkable PTFE sleeving |
| IEC 60684-3-246-2007 | 绝缘软套管.第3部分:各种型号套管规范.第246节:双壁不阻燃聚烯烃热收缩软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded |
| IEC 60684-3-248-2007 | 绝缘软套管.第3部分:各种型号套管的规范.第248节:收缩比率为2:1、3:1、4:1的双壁阻燃聚烯烃热收缩软管一般 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 |
| IEC 60684-3-271-2004 | 绝缘软管.第3部分:各种型号软管规范.活页271:阻燃、耐流体、收缩比2:1的热收缩、弹性体软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
| IEC 60684-3-300-2002 | 绝缘软管.第3部分:各种型号软管规范.第300篇:无涂层的玻璃纤维编织软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated |
| IEC 60684-3-320-2002 | 绝缘软管.第3部分:各种型号软管规范.第320篇:轻度浸渍的聚对苯二甲酸乙二醇酯编织物 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated |
| IEC 60684-3-343 to 345-2002 | 绝缘软管.第3部分:各种型号软管规范.第343至345篇:无涂层可扩张编织的乙烯三氟氯乙烯纤维软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated |
| IEC 60684-3-400 to 402-2002 | 绝缘软管.第3部分:各种型号软管规范.第400至402篇:硅弹性玻璃纤维软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating |
| IEC 60684-3-409-1999 | 绝缘软管 第3部分:各种型号软管的规范 活页409:聚胺酯(PUR)涂覆层的玻璃纤维软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating |
| IEC 61479 AMD 1-2002 | 带电作业.绝缘材料制的软导体套(线性软管).修改1 | Live working - Flexible conductor covers (line hoses) of insulating material; Amendment 1 |
| IEC 61479 Edition 1.1-2002 | 带电作业.绝缘材料制的软导体套(线性软管) | Live working - Flexible conductor covers (line hoses) of insulating material |
| IEC 61770 AMD 1-2004 | 修改件1.与总水管连接的电气器具.避免软管组件的反虹吸和失效 | Amendment 1 - Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets |
| IEC 61770 AMD 2-2006 | 与总水管连接的电气器具.避免反虹吸和软管组件失效.修改件2 | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets; Amendment 2 |
| IEC 61770 Edition 1.1-2004 | 与总水管连接的电气器具.避免软管组件的反虹吸和失效 | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets |
| IEC 61770 Edition 1.2-2006 | 连接总水管的电子设备.避免软管组件的反虹吸和失效 | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets |
| IEC 61770-1998 | 与总水管连接的电气器具 避免软管组件的反虹吸和失效 | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets |
| IEC 62237-2003 | 带电作业.液压工具和设备用带配件的绝缘软管 | Live working - Insulating hoses with fittings for use with hydraulic tools and equipment |
| ISO 10380-2003 | 管道系统.波纹状金属软管和软管配件 | Pipework - Corrugated metal hoses and hose assemblies |
| ISO 10502-1992 | 航空航天.温度为230℃及以下、压力为10500 kPa下使用的聚四氟乙烯(PTFE)软管组件.采购规范 | Aerospace; hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10500 kPa; procurement specification |
| ISO 10806-2003 | 管道工程.波纹状金属软管用配件 | Pipework - Fittings for corrugated metal hoses |
| ISO 10960-1994 | 橡胶和塑料软管 动态条件下耐臭氧性的评定 | Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions |
| ISO 11237-1-2004 | 橡胶软管和软管组件.用于液压系统的金属丝编织增强压实型软管和软管组件.规范.第1部分:用于油基液体 | Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Part 1: Oil-based fluid applications |
| ISO 11237-2-2006 | 橡胶软管和软管组件.用于液压系统的金属丝编织增强压实型软管和软管组件.规范.第2部分:用于水基液体 | Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Part 2: Water-based fluid applications |
| ISO 11424-1996 | 内燃机的空气和真空系统用橡胶软管及其管件 规范 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification |
| ISO 11425-1996 | 机动车液压转向装置用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for automobile power-steering systems - Specification |
| ISO 11758 Technical Corrigendum 1-1998 | 橡胶和塑料软管 氙弧灯照射 颜色和外观变化的测定 技术勘误1 | Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance; Technical Corrigendum 1 |
| ISO 11758-1995 | 橡胶和塑料软管 氙弧灯照射 颜色和外观变化的测定 | Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance |
| ISO 11759-1999 | 输送液化石油气用橡胶软管和软管组件(LPGs) 规范 | Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) - Specification |
| ISO 12151-1-1999 | 液压传动和通用联接件 软管接头 第1部分:带ISO 8434-3 O形圈端面密封末端的软管接头 | Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends |
| ISO 12151-2-2003 | 液压传动和通用联接件.软管接头.第2部分:带ISO 8434-1 O形圈24锥形末端的软管接头 | Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings |
| ISO 12151-3-1999 | 液压传动和通用联接件 软管接头 第3部分:带ISO6162法兰末端的软管接头 | Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends |
| ISO 12151-4-2007 | 用于液压流体传动和一般用途的接头.软管配件.第4部分:带ISO 6149米制螺柱头的软管配件 | Connections for hydraulic fluid power and general use - Hose fittings - Part 4: Hose fittings with ISO 6149 metric stud ends |
| ISO 12151-5-2007 | 用于液压流体传动和一般用途的接头.软管配件.第5部分:带ISO 8434-2 37°扩口端的软管配件 | Connections for hydraulic fluid power and general use - Hose fittings - Part 5: Hose fittings with ISO 8434-2 37° flared ends |
| ISO 12170-1996 | 气焊设备 焊接及相关工艺用热塑性软管 | Gas welding equipment - Thermoplastic hoses for welding and allied processes |
| ISO 1307-2006 | 橡胶和塑料软管.软管大小、最小和最大内径及长软管切割公差 | Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
| ISO 13363-2004 | 船用发动机湿排气系统用橡胶和塑料软管.规范 | Rubber and plastics hoses for marine-engine wet-exhaust systems - Specification |
| ISO 13628-11-2007 | 石油和天然气工业.水底生产系统的设计和运行.第11部分:海底和海上设备用软管系统 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 11: Flexible pipe systems for subsea and marine applications |
| ISO 13628-2-2006 | 石油和天然气工业.水下采油系统的设计和操作.第2部分:海底和海洋设备用游离软管系统 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications |
| ISO 13774-1998 | 内燃机燃料用橡胶和塑料软管 耐燃性试验方法 | Rubber and plastics hoses for fuels for internal-combustion engines - Method of test for flammability |
| ISO 13775-1-2000 | 汽车用热塑管和软管 第1部分:非燃料上应用 | Thermoplastic tubing and hoses for automotive use - Part 1: Non-fuel applications |
| ISO 13775-2-2000 | 汽车用热塑管和软管 第2部分:石油类燃料上应用 | Thermoplastic tubing and hoses for automotive use - Part 2: Petroleum-based-fuel applications |
| ISO 1401-1999 | 农业喷雾用橡胶软管 | Rubber hoses for agricultural spraying |
| ISO 1402-1994 | 橡胶和塑料软管和软管组件 液压试验 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing |
| ISO 1403-2005 | 一般用途的输水用织物增强橡胶软管.规范 | Rubber hoses, textile-reinforced, for general-purpose water applications - Specification |
| ISO 1436-1-2001 | 橡胶软管和软管组件 金属丝编制物增强液压管规格 第1部分：油基流体应用 | Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types; Specification - Part 1: Oil-based fluid applications |
| ISO 1436-2-2005 | 橡胶软管和软管组件.金属丝编织增强液压类型.规范.第2部分：水基流体设施 | Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types - Specification - Part 2: Water-based fluid applications |
| ISO 14557 AMD 1-2007 | 灭火软管.橡胶和塑料吸入软管和软管组件.修改件1 | Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies; Amendment 1 |
| ISO 14557-2002 | 消防水龙带.橡胶和塑料制吸入软管和软管组件 | Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies |
| ISO 15465-2004 | 管道.带绕金属软管和软管组件 | Pipework - Stripwound metal hoses and hose assemblies |
| ISO 15500-15-2001 | 道路车辆 压缩天然气(CNG)燃料系统部件 第15部分:防气罩和通风软管 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 15: Gas-tight housing and ventilation hose |
| ISO 15540 Technical Corrigendum 1-1999 | 船舶与海上技术 软管组件耐火性 试验方法 技术勘误1 | Ships and marine technology - Fire resistance of hose assemblies - Test methods; Technical Corrigendum 1 |
| ISO 15540-1999 | 船舶与海上技术 软管组件耐火性 试验方法 | Ships and marine technology - Fire resistance of hose assemblies - Test methods |
| ISO 15541-1999 | 船舶与海上技术 软管组件耐火性 试验台技术要求 | Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench |
| ISO 17165-1-2007 | 液压传动.软管组件.第1部分:尺寸和要求 | Hydraulic fluid power - Hose assemblies - Part 1: Dimensions and requirements |
| ISO 1746 Technical Corrigendum 1-1999 | 橡胶或塑料软管和管件 弯曲试验 技术勘误1 | Rubber or plastics hoses and tubing - Bending tests; Technical corrigendum 1 |
| ISO 1746-1998 | 橡胶或塑料软管和管件 弯曲试验 | Rubber or plastics hoses and tubing - Bending tests |
| ISO 1823-1-1997 | 橡胶软管和软管组件 第1部分:近海排吸油用软管 规范 | Rubber hoses and hose assemblies - Part 1: On-shore oil suction and discharge - Specification |
| ISO 1823-2-1997 | 橡胶软管和软管组件 第2部分:船舶/码头上排吸用软管 规范 | Rubber hoses and hose assemblies - Part 2: Ship/dockside discharge - Specification |
| ISO 1825-1996 | 飞机地面加油和放油用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification |
| ISO 18752-2006 | 橡胶软管和软管组件.金属丝或纺织物.水利用的单胎压力加强型.规范 | Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification |
| ISO 19013-1-2005 | 内燃机燃料回路用橡胶软管和管.规范.第1部分:柴油 | Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels |
| ISO 19013-2-2005 | 内燃机燃料回路用橡胶软管和管.规范.第2部分:汽油 | Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 2: Gasoline fuels |
| ISO 21012-2006 | 低温容器.软管 | Cryogenic vessels - Hoses |
| ISO 23717-2006 | 钢丝和钢丝制品.软管加筋钢丝 | Steel wire and wire products - Hose reinforcement wire |
| ISO 23933-2006 | 航空航天.等级为135 °C/20.684 kPa (275 °F/3.000 psi) 和135 °C/21.000 kPa (275 °F/3.046 psi)的芳族 | Aerospace - Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 °C/20.684 kPa (275 °F/3.000 psi) and 135 °C/21.000 kPa (275 °F/3.046 psi) - Procurement specification |
| ISO 2398-2006 | 织物增强的压缩空气用橡胶软管.规范 | Rubber hoses, textile-reinforced, for compressed air - Specification |
| ISO 2928-2003 | 25巴(2.5MPa)及以下的天然气和液相或气相液化石油气用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) - Specification |
| ISO 2929-2002 | 油槽车排吸油用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for bulk fuel delivery by truck - Specification |
| ISO 3253-1998 | 气焊设备 焊接、切割和有关工艺设备的软管接头 | Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes |
| ISO 3821-1998 | 气焊设备 焊接、切割和相关工艺用橡胶软管 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes |
| ISO 3861-2005 | 喷砂清理用橡胶软管.规范 | Rubber hoses for sand and grit blasting - Specification |
| ISO 3862-1-2001 | 橡胶软管和软管组件 覆盖螺旋金属丝的橡胶增强液压软管 规范 第1部分：油基流体的应用 | Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types; Specification - Part 1: Oil-based fluid applications |
| ISO 3862-2-2005 | 橡胶软管和软管组件.橡胶包覆的螺旋金属丝增强液压类型.规范.第2部分：水基流体设施 | Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types - Specification - Part 2: Water-based fluid applications |
| ISO 3949-2004 | 塑料软管和软管组件.织物增强型液压软管.规范 | Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification |
| ISO 3994-2007 | 塑料软管.含水材料吸入和排放用螺旋热塑增强式热塑性软管.规范 | Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification |
| ISO 3996-1995 | 道路车辆 使用非石油基制动液的液压制动系统软管组件 | Road vehicles - Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid |
| ISO 4023-1991 | 蒸气胶管 试验方法 | Rubber hoses for steam; test methods |
| ISO 4038-1996 | 道路车辆 液压制动系统 单喇叭口管、螺孔和阳螺纹接头和软管管端接头 | Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings |
| ISO 4041-1978 | 旋转钻井设备.旋转式软管 | Rotary drilling equipment; Rotary hoses |
| ISO 4079-1-2001 | 橡胶软管和软管组件 织物增强液压软管 规范 第1部分：油基流体的应用 | Rubber hoses and hose assemblies - Textile-reinforced hydraulic types; Specification - Part 1: Oil-based fluid applications |
| ISO 4079-2-2005 | 橡胶软管和软管组件.织物增强液压型.规范.第2部分:水基流体的应用 | Rubber hoses and hose assemblies - Textile-reinforced hydraulic types - Specification - Part 2: Water-based fluid applications |
| ISO 4080 Technical Corrigendum 1-1997 | 橡胶和塑料软管和软管组件 漏气率的测定 技术勘误1 | Rubber and plastic hoses and hose assemblies - Determination of permeability to gas; Technical corrigendum 1 |
| ISO 4080 Technical Corrigendum 2-1998 | 橡胶和塑料软管和软管组件 漏气率的测定 技术勘误2 | Rubber and plastics hoses and hose assemblies - Determination of permeability to gas; Technical Corrigendum 2 |
| ISO 4080-1991 | 橡胶和塑料软管和软管组件 漏气率的测定 | Rubber and plastic hoses and hose assemblies; determination of permeability to gas |
| ISO 4081-2005 | 内燃机用制冷系统用橡胶软管和管件.规范 | Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification |
| ISO 4397-1993 | 流体传动系统和元件 管接头及其附件 硬管外径和软管内径 | Fluid power systems and components; connectors and associated components; nominal outside diameters of tubes and nominal inside diameters of hoses |
| ISO 4641-2005 | 给排水用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for water suction and discharge - Specification |
| ISO 4642-1978 | 橡胶制品 不可折叠的消防软管 | Rubber products; Hoses, non-collapsible, for fire-fighting service |
| ISO 4671-1999 | 橡胶和塑料软管和软管组件 尺寸测量方法 | Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions |
| ISO 4672-1997 | 橡胶和塑料软管 低温的弯曲试验 | Rubber and plastics hoses - Sub-ambient temperature flexibility tests |
| ISO 5031-1977 | 松散物料连续搬运设备 气力输送用接头和软管 安全规则 | Continuous mechanical handling equipment for loose bulk materials; Couplings and hose components used in pneumatic handling; Safety code |
| ISO 5359-2000 | 医用气体用低压软管组件 | Low-pressure hose assemblies for use with medical gases |
| ISO 5771 Technical Corrigendum 1-1995 | 输送无水氨用橡胶软管和软管组件 规范 技术勘误1 | Rubber hose and hose assemblies for transferring anhydrous ammonia - Specification; Technical Corrigendum 1 |
| ISO 5771-1994 | 输送无水氨用橡胶软管和软管组件 规范 | Rubber hose and hose assemblies for transferring anhydrous ammonia - Specification |
| ISO 5772-1998 | 测量燃油分配料用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for measured fuel dispensing - Specification |
| ISO 5774-2006 | 塑料软管.压缩空气用织物增强型.规范 | Plastics hoses - Textile-reinforced types for compressed-air applications - Specification |
| ISO 6120-1995 | 道路车辆.使用石油基液压液的液压制动系统制动软管总成 | Road vehicles - Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid |
| ISO 6134-2005 | 饱和蒸汽用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for saturated steam - Specification |
| ISO 6224-2005 | 一般用途的输水用织物增强的热塑性软管.规范 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification |
| ISO 6605-2002 | 液压传动.软管及软管组件.试验方法 | Hydraulic fluid power - Hoses and hose assemblies - Test methods |
| ISO 6772-1988 | 航空航天 流体系统 液压软管、导管和接头组件的冲击试验 | Aerospace; fluid systems; impulse testing of hydraulic hose, tubing and fitting assemblies |
| ISO 6801-1983 | 橡胶或塑料软管 容积膨胀的测定 | Rubber or plastics hoses; Determination of volumetric expansion |
| ISO 6802-2005 | 钢丝增强的橡胶和塑料软管及软管组件.弯曲液压脉冲试验 | Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing |
| ISO 6803-1994 | 橡胶或塑料软管和软管组件 无弯曲的液压脉冲试验 | Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing |
| ISO 6804-1991 | 洗衣机和洗碗机用橡胶软管和软管组件 进水软管规范 | Rubber hoses and hose assemblies for washing-machines and dishwashers; specification for inlet hoses |
| ISO 6805-1994 | 井下采矿用的橡胶软管和软管组件 采煤用钢丝增强液压型 规范 | Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification |
| ISO 6806-1992 | 油燃烧器用软管和软管组件 规范 | Rubber hoses and hose assemblies for use in oil burners; specification |
| ISO 6807-2003 | 旋转式钻进和振动设施用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification |
| ISO 6808-1999 | 给排油用塑料软管和软管组件 规范 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification |
| ISO 6945 AMD 1-1998 | 橡胶软管 外覆层耐磨性的测定 修改1 | Rubber hoses - Determination of abrasion resistance of the outer cover; Amendment 1 |
| ISO 6945-1991 | 橡胶软管 外覆层耐磨性的测定 | Rubber hoses; determination of abrasion resistance of the outer cover |
| ISO 7233-2006 | 橡胶和塑料软管和软管组件.耐真空性能测定 | Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum |
| ISO 7313-1984 | 航空器 聚四氟乙烯(PTFE)制的高温盘卷软管组件 | Aircraft; High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) |
| ISO 7314-2002 | 航空航天.液压系统.金属软管组件 | Aerospace - Fluid systems - Metal hose assemblies |
| ISO 7326-2006 | 橡胶和塑料软管.静态条件下评定耐臭氧性 | Rubber and plastics hoses - Assessment of ozone resistance under static conditions |
| ISO 7369-2004 | 管道工程.金属软管和软管组件.词汇 | Pipework - Metal hoses and hose assemblies - Vocabulary |
| ISO 7662-1988 | 橡胶和塑料软管 衬里耐磨性的测定 | Rubber and plastics hoses; determination of abrasion of lining |
| ISO 7751-1991 | 橡胶和塑料软管和软管组件 试验压力和爆破压力对设计工作压力的比值 | Rubber and plastics hoses and hose assemblies; ratios of proof and burst pressure to design working pressure |
| ISO 7840-2004 | 小艇.耐火燃油软管 | Small craft - Fire-resistant fuel hoses |
| ISO 8028-1999 | 真空喷涂漆用橡胶和/或塑料软管和软管组件 规范 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification |
| ISO 8029-2007 | 塑料软管.一般用途的纺织物增强的可折叠水管.规范 | Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification |
| ISO 8030-1995 | 橡胶和塑料软管 易燃烧性试验方法 | Rubber and plastics hoses - Method of test for flammability |
| ISO 8031-1993 | 橡胶和塑料软管和软管组件 电阻率测定 | Rubber and plastics hoses and hose assemblies; determination of electrical resistance |
| ISO 8032-1997 | 橡胶和塑料软管组件 液压脉冲弯曲试验(半Ω 型试验) | Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) |
| ISO 8033-2006 | 橡胶和塑料软管.部件间粘合强度的测定 | Rubber and plastics hoses - Determination of adhesion between components |
| ISO 8066-2-2001 | 汽车空调器用橡胶和塑料软管和软管组件 规范 第2部分：制冷剂134a | Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Part 2: Refrigerant 134a |
| ISO 8207-1996 | 气焊设备 焊接、切割和相关工艺设备用软管组件规范 | Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
| ISO 8224-2-1991 | 移动式灌溉机械 第2部分:软管和联结器 试验方法 | Traveller irrigation machines; part 2: softwall hose and couplings; test methods |
| ISO 8308-2006 | 橡胶和塑料软管和管道系统.液体透过软管管壁渗透测定 | Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls |
| ISO 8330-2007 | 橡胶和塑料软管及软管组件.词汇 | Rubber and plastics hoses and hose assemblies - Vocabulary |
| ISO 8331-2007 | 橡胶和塑料软管及软管组件. 选择、储存、使用和维修指南 | Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance |
| ISO 8469-2006 | 小艇.非耐火燃油软管 | Small craft - Non-fire-resistant fuel hoses |
| ISO 8580-1987 | 橡胶和塑料软管 稳定状态下耐紫外线的测定 | Rubber and plastics hoses; Determination of ultra-violet resistance under static conditions |
| ISO 8789-1994 | 摩托车输送液化石油气用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification |
| ISO 8829-2-2006 | 航空.聚四氟乙烯(PTFE)内软管组件试验方法.第2部分:非金属编织物 | Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies - Part 2: Non-metallic braid |
| ISO 8913-2006 | 航空航天.轻型聚四氟乙烯(PTFE)软管组件.等级：400℉/3000psi(204℃/20684kPa)和204℃/21000 kPa(400℉/304 | Aerospace - Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 °F/3 000 psi (204 °C/20 684 kPa) and 204 °C/21 000 kPa (400 °F/3 046 psi) - Procurement specification |
| ISO 9168-1991 | 牙科手机 软管连接件 | Dental handpieces; hose connectors |
| ISO 9528-1994 | 航空航天 等级为21000kPa/204℃标准型聚四氟乙烯(PTFE)软管组件 采购规范 | Aerospace - Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 C/21 000 kPa - Procurement specification |
| ISO 9938-1994 | 航空航天 强度温度等级为204℃/28000 kPa的聚四氟乙烯软管组件 采购规范 | Aerospace - Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 C/28 000 kPa - Procurement specification |
| ISO/TR 11340-1994 | 橡胶和橡胶制品 液压软管装置 液压系统的外部泄漏分类 | Rubber and rubber products - Hydraulic hose assemblies - External leakage classification for hydraulic systems |
| ISO/TR 17165-2-2006 | 液压流体动力.软管组件.第2部分:液压软管组件的推荐实施规程 | Hydraulic fluid power - Hose assemblies - Part 2: Recommended practices for hydraulic hose assemblies |
| ISO/TR 17784-2003 | 橡胶和塑料软管及软管组件.购买人、装配工、安装工和操作者用指南 | Rubber and plastics hoses and hose assemblies - Guide for use by purchasers, assemblers, installers and operating personnel |
| ISO/TR 8354-1987 | 井下采矿用橡胶软管和软管组件 输气和输水用织物增强型胶管 | Rubber hoses and hose assemblies for underground mining; Textile-reinforced air and water type |
| ISO/TR 8354-1987 | 井下采矿用橡胶软管和软管组件 输气和输水用织物增强型胶管 | Rubber hoses and hose assemblies for underground mining; Textile-reinforced air and water type |
日本软管标准(JIS hose standards)
| 编号 | 中文名称 日本語標題 |
英文名称 |
|---|---|---|
| JIS B6805-2003 | 焊接、切割及相关工艺用设备的橡胶软管连接 溶断器用ゴムホース継手 |
Rubber hose connection for equipment for welding, cutting and allied processes |
| JIS B8261-1995 | 液化石油气用软管组件 液化石油ガス用ゴムホースアセンブリ |
Hose assemblies for liquefied petroleum gas |
| JIS B8261 AMD 1-2006 | 液化石油气用软管组件(修改件1) 液化石油ガス用ゴムホースアセンブリ（追補１） |
Hose assemblies for liquefied petroleum gas (Amendment 1) |
| JIS B8261 AMD 2-2009 | 液化石油气用软管组件(修改件2) 液化石油ガス用ゴムホースアセンブリ（追補２） |
Hose assemblies for liquefied petroleum gas (Amendment 2) |
| JIS B8360-2000 | 液压用钢丝增强的橡胶软管组件 液圧用鋼線補強ゴムホースアセンブリ |
Wire reinforced rubber hose assemblies for hydraulic use |
| JIS B8362-2000 | 液压用织物增强的热塑性塑料软管组件 | Textile reinforced thermoplastic hose assemblies for hydraulic use |
| JIS B8363-2000 | 液压软管组件的端部配件及接头 液圧用繊維補強樹脂ホースアセンブリ |
End fittings and adapters for hydraulic hose assemblies |
| JIS B8364-2000 | 液压用织物增强的橡胶软管组件 液圧用繊維補強ゴムホースアセンブリ |
Textile reinforced rubber hose assemblies for hydraulic use |
| JIS B9119-1989 | 喷雾器用软管联接器和软管接头 噴霧機用ホース継手及びホースつなぎ |
Hose couplings and hose joints for sprayer |
| JIS D2601-2006 | 汽车零件.使用非石油基制动流体的液压制动系统的制动软管组件 自動車部品―非鉱油系液圧ブレーキホースアセンブリ |
Automotive parts -- Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid |
| JIS D2602-2008 | 橡胶.私人汽车和轻型商业车辆用冷却剂软管和管.规范 自動車用ウォーターホース |
Rubber hoses and tubing for cooling systems for internal-combustion engines -- Specification |
| JIS D2606-2008 | 汽车零件.空气制动橡胶软管和软管组件 自動車部品―エアブレーキゴムホースアセンブリ |
Automotive parts -- Air brake rubber hose and hose assemblies |
| JIS D2607-2008 | 汽车部件.真空制动橡胶软管 自動車部品―バキュームブレーキゴムホースアセンブリ |
Automotive parts -- Vacuum brake rubber hose |
| JIS D3621-1982 | 汽车用软管夹 自動車用ホースクランプ |
Hose clamps for automobiles |
| JIS F7150-1999 | 小艇.非耐火性燃油软管 舟艇 ― 非耐火性燃料ホース |
Small craft -- Non-fire-resistant fuel hoses |
| JIS F7151-1999 | 小艇.耐高温燃油软管 舟艇 ― 耐火性燃料ホース |
Small craft -- Fire-resistant fuel hoses |
| JIS F7152-2006 | 船用发动机湿排气系统用橡胶和塑料软管.规范 船舶湿式排気システム用ゴム及び樹脂ホース |
Rubber and plastics hoses for marine-engine wet-exhaust systems -- Specification |
| JIS F7333-1996 | 造船.铸铁软管阀 船用鋳鉄ホース弁 |
Shipbuilding -- Cast iron hose valves |
| JIS F7334-1996 | 造船.青铜软管阀 船用青銅ホース弁 |
Shipbuilding -- Bronze hose valves |
| JIS F7335-2008 | 造船.软管连接件和管件 船用ホース金物 |
Shipbuilding -- Hose connections and fittings |
| JIS K6330-1-2003 | 橡胶和塑料软管的测试方法.第1部分:软管和软管组件尺寸的测量方法 ゴム及びプラスチックホース試験方法－第１部：ホース及びホースアセンブリの寸法測定 |
Testing methods for rubber and plastics hoses -- Part 1: Methods of measurement of dimensions for hoses and hose assemblies |
| JIS K6330-2-1998 | 橡胶和塑料软管的测试方法.第2部分:液体静力法 ゴム及び樹脂ホース試験方法 ― 第２部：耐圧性試験 |
Testing methods for rubber and plastics hoses -- Part 2: Hydrostatic testing |
| JIS K6330-3-1998 | 橡胶和塑料软管的测试方法.第2部分:抽吸阻力的测定 ゴム及び樹脂ホース試験方法 ― 第３部：負圧試験 |
Testing methods for rubber and plastics hoses -- Part 3: Determination of suction resistance |
| JIS K6330-4-2003 | 橡胶和塑料软管的测试方法.第4部分:低于室温的弯曲试验 ゴム及びプラスチックホース試験方法 ― 第４部：低温雰囲気下における柔軟性 |
Testing methods for rubber and plastics hoses -- Part 4: Sub-ambient temperature flexibility tests |
| JIS K6330-5-1998 | 橡胶和塑料软管的测试方法.第5部分:电阻的测定 ゴム及び樹脂ホース試験方法 ― 第５部：電気試験 |
Testing methods for rubber and plastics hoses -- Part 5: Determination of electrical resistance |
| JIS K6330-6-1998 | 橡胶和塑料软管的测试方法.第6部分:部件间附着力的测定 ゴム及び樹脂ホース試験方法 ― 第６部：接着試験 |
Testing methods for rubber and plastics hoses -- Part 6: Determination of adhesion between components |
| JIS K6330-7-1998 | 橡胶和塑料软管的测试方法.第7部分:静态条件下对臭氧抗性的评估 ゴム及び樹脂ホース試験方法 ― 第７部：静的オゾン劣化試験 |
Testing methods for rubber and plastics hoses -- Part 7: Assessment of ozone resistance under static conditions |
| JIS K6330-8-1998 | 橡胶和塑料软管的测试方法.第8部分:无挠曲的液压脉冲试验 ゴム及び樹脂ホース試験方法 ― 第８部：衝撃圧力試験 |
Testing methods for rubber and plastics hoses -- Part 8: Hydraulic-pressure impulse test without flexing |
| JIS K6330-9-2003 | 橡胶和塑料软管的测试方法.第9部分:软管和管件的弯曲性能 ゴム及びプラスチックホース試験方法－第９部：ホース及び管の曲げ特性 |
Testing methods for rubber and plastics hoses -- Part 9: Bending properties of hoses and tubing |
| JIS K6330-10-1998 | 橡胶和塑料软管的试验方法.第10部分:通过软管壁对液体传输进行的测定 ゴム及び樹脂ホース試験方法 ― 第１０部：液体透過性試験 |
Testing methods for rubber and plastics hoses -- Part 10: Determination of transmission of liquids through hose walls |
| JIS K6331-1999 | 一般用途的供水用的织物增强的橡胶软管.规范 送水用ゴムホース（ウォーターホース） |
Rubber hoses, textile-reinforced, for general-purpose water applications -- Specification |
| JIS K6331 AMD 1-2006 | 一般用途的供水用的织物增强的橡胶软管.规范（修改件1） 送水用ゴムホース（ウォーターホース）（追補１） |
Rubber hoses, textile-reinforced, for general-purpose water applications -- Specification (Amendment 1) |
| JIS K6332-1999 | 压缩空气用的织物增强的橡胶软管.规范 空気用ゴムホース（エアーホース） |
Rubber hose, textile-reinforced, for compressed air -- Specification |
| JIS K6332 AMD 1-2006 | 压缩空气用纺织物增强式橡胶软管.规范（修改件1） 空気用ゴムホース（エアーホース）（追補１） |
Rubber hose, textile-reinforced, for compressed air -- Specification (Amendment 1) |
| JIS K6333-1999 | 气焊设备.焊接、切割及相关工艺用橡胶软管 溶断用ゴムホース |
Gas welding equipment -- Rubber hoses for welding, cutting and allied processes |
| JIS K6333 AMD 1-2001 | 气焊设备.焊接、切割和有关加工工艺用橡胶软管(修改件1) 溶断用ゴムホース（追補１） |
Gas welding equipment -- Rubber hoses for welding, cutting and allied processes (Amendment 1) |
| JIS K6335-1999 | 蒸汽用橡胶软管和软管组件.规范 蒸気用ゴムホース（スチームホース） |
Rubber hoses and hose assemblies for steam -- Specification |
| JIS K6335 AMD 1-2006 | 蒸汽用橡胶软管和软管组件.规范（修改件1） 蒸気用ゴムホース（スチームホース）（追補１） |
Rubber hoses and hose assemblies for steam -- Specification (Amendment 1) |
| JIS K6338-1999 | 吸水和排水用的橡胶软管.规范 吸排水用ゴムホース（ウォーターサクションディスチャージホース） |
Rubber Hoses for Water Suction and Discharge -- Specification |
| JIS K6339-1999 | 农业用喷雾器热塑性塑料软管 農業用噴霧機樹脂ホース |
Spray thermoplastic hoses for agricultural use |
| JIS K6343-2004 | 卸油用橡胶软管 送油用ゴムホース |
Rubber hoses for oil discharge |
| JIS K6346-1999 | 海岸吸油和卸油用的橡胶软管和软管组件.规范 送吸油用ゴムホース |
Rubber hoses and hose assemblies -- On-shore oil suction and discharge -- Specification |
| JIS K6347-1-2003 | 液化石油气用橡胶软管(LPG软管).第1部分:汽车、一般设备和家用.规范 液化石油ガス用ゴムホース（ＬＰＧホース） ― 第１部：自動車，一般設備及び一般家庭用 |
Rubber hoses for liquefied petroleum gases (LPGs) -- Part 1: Automobile, General equipment and home application -- Specification |
| JIS K6347-2-1999 | 液化石油气用橡胶软管(LPG软管).第2部分:松散材料输送设备.规范 液化石油ガス用ゴムホース（ＬＰＧホース） ― 第２部：バルク輸送用 |
Rubber hoses for liquefied petroleum gases (LPG) -- Part 2: Bulk transfer applications -- Specification |
| JIS K6347-3-2003 | 液化石油气用橡胶软管.第3部分:分配软管及软管组合件.规范 液化石油ガス用ゴムホース（ＬＰＧホース） ― 第３部：充てん用ホース及びホースアセンブリ |
Rubber hoses for liquefied petroleum gases (LPGs) -- Part 3: Dispensing hoses and hose assemblies -- Specification |
| JIS K6348-2006 | 气体用橡胶管 ガス用ゴム管 |
Rubber tubes for gas |
| JIS K6349-1-1999 | 液压用钢丝增强橡胶软管.第1部分:橡胶软管和软管组件.线增强液压型.规范 液圧用鋼線補強ゴムホース ― 第１部：鋼線編組補強ゴムホース |
Wire reinforced rubber hoses for hydraulic -- Part 1: Rubber hoses and hose assemblies -- Wire-reinforced hydraulic type -- Specification |
| JIS K6349-2-1999 | 液压用钢丝增强橡胶软管.第2部分:橡胶软管和软管组件.橡胶包覆的螺旋线增强液压型.规范 液圧用鋼線補強ゴムホース ― 第２部：鋼線スパイラル補強ゴムホース |
Wire reinforced rubber hoses for hydraulic -- Part 2: Rubber hoses and hose assemblies -- Rubber-covered, spiral wire reinforced, hydraulic type -- Specification |
| JIS K6349-3 ERRATUM 1-2000 | 液压系统用钢丝增强橡胶软管.第3部分:钢丝增强橡胶软管(勘误 1) | Wire reinforced rubber hoses for hydraulic -- Part 3: Wire reinforced rubber hoses (Erratum 1) |
| JIS K6349-3-1999 | 液压用钢丝增强橡胶软管.第3部分:线增强橡胶软管 液圧用鋼線補強ゴムホース ― 第３部：鋼線補強ゴムホース |
Wire reinforced rubber hoses for hydraulic -- Part 3: Wire reinforced rubber hoses |
| JIS K6351-2006 | 气体用金属线增强橡胶软管和软管配件 ガス用強化ゴムホース及びホースアセンブリ |
Wire reinforced rubber hoses and hose assemblies for gas |
| JIS K6375-1999 | 塑料软管和软管组件.液压型织物增强的热塑性塑料.规范 液圧用繊維補強樹脂ホース |
Plastics hoses and hose assemblies -- Thermoplastics, textile-reinforced, hydraulic type -- Specification |
| JIS K6379-1999 | 塑料软管和软管组件.织物增强的液压型.规范 液圧用繊維補強ゴムホース |
Rubber hoses and hose assemblies -- Textile-reinforced hydraulic type -- Specification |
| JIS S2145-1991 | 气体用金属挠性软管 ガス用金属フレキシブルホース |
Metallic flexible hoses for gas |
| JIS S2145 AMD 1-2006 | 气体用金属挠性软管(修改件1) ガス用金属フレキシブルホース（追補１） |
Metallic flexible hoses for gas (Amendment 1) |
| JIS S2146-1991 | 煤气用双头速接橡胶管和聚氯乙烯软管 両端迅速継手付ガス用ゴム管及び両端迅速継手付ガス用塩化ビニルホース |
Rubber tubes and polyvinyl chloride hoses with both end convenient joints for gas |
| JIS S2190-1993 | 橡胶管件的管箍 ガス用ゴム管バンド |
Bands for rubber tube |
| JIS S3022-2003 | 燃油设备用输油橡胶软管 石油燃焼機器用ゴム製送油管 |
Oil discharge rubber hoses for oil burning appliances |
| JIS T3270-2007 | 长期使用的输尿管软管斯滕特固定模 長期使用尿管用チューブステント |
Ureteral tube stents for long-term use |
| JIS T5905-1993 | 牙钻手柄.软管连接器 歯科用ハンドピースとホースのコネクタ |
Dental handpieces -- Hose connectores |
| JIS T7111-2006 | 医疗气体系统使用的软管组件 医療ガスホースアセンブリ |
Hose assemblies for use with medical gas systems |
法国软管标准(NF hose standards)
| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| NF A84-419-1997 | 气焊设备.能承受最大检验设计气压为450巴的压缩和液化气用橡胶和塑料软管组件 | (Gas welding equipment. Rubber and plastic hoses assembled for compressed or liquified gases up to a maximum design pressure of 450 bar.) |
| NF A84-622-1994 | 气焊设备.焊接设备,切割和连接技术用软管连接 | (Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes.) |
| NF C18-479-2001 | 带电作业.绝缘材料用柔性导线外壳(软管) | (Live working - Flexible conductor covers (line hoses) of insulating material.) |
| NF C93-643-240-2003 | 绝缘软管.第3部分:各种型号软管规范.第240至243篇:热收缩聚四氟乙烯绝缘软套管(PTFE) | (Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheets 240 to 243 : heat-shrinkable PTFE sleeving.) |
| NF C93-643-300-2003 | 绝缘软管.第3部分:各种型号软管规范.第300篇:无涂层的玻璃纤维编织软管 | (Flexible insulating sleeving - Part 3 : specification requirements for individual types of sleeving - Sheet 300 : glass textile fibre sleeving, braided, uncoated.) |
| NF C93-643-320-2003 | 绝缘软管.第3部分:各种型号软管规范.第320篇:轻度浸渍的聚对苯二甲酸乙二醇酯编织物 | (Flexible insulating sleeving - Part 3 : specifications requirements for individual type of sleeving - Sheet 320 : polyethylene terephthalate textile sleeving, lightly impregnated.) |
| NF C93-643-343-2003 | 绝缘软管.第3部分:各种类型绝缘软管规范.第343至345篇:未涂覆的扩展编织的乙稀-三氟氯乙稀软管 | (Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheets 343 to 345 : expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated.) |
| NF C93-643-400-2003 | 绝缘软管.第3部分:各种型号软管的规范要求.第400至402篇:带有机硅橡胶涂层的玻璃纤维织物软管 | (Flexible insulating sleeving - Part 3 : specification requirements for individual types of sleeving - Sheets 400 to 402 : glass textile sleeving with silicone elastomer coating.) |
| NF D18-208-1997 | (PN 10)卫生间管件的淋浴用软管 | (Showers hoses for (PN 10) sanitary tapware.) |
| NF D18-218-2004 | 卫生设备旋塞用低阻力淋浴软管 | (Low resistance shower hoses for sanitary tapware.) |
| NF D36-103-2001 | 家政学.使用管道气体燃料的家用器具外部连接用(增强)橡胶软管 | (Household economy - (Reinforced) flexible rubber tubing for the external connection of domestic appliances using gaseous fuels by networks.) |
| NF D36-105-1976 | 燃气洗衣机内部连接用带机械接头的软管 | (FLEXIBLE HOSE WITH MECHANICAL CONNECTORS FOR JOINTS INSIDE GAS-POWERED WASHING MACHINES.) |
| NF D36-107-1994 | 家政学.家用管道煤气装置连接用的带机械接头的11号或12号聚酰胺基未增强软管 | (Household economy. Flexible piping based on polyamide 11 or 12 for the external connection of domestic appliances using gaseous fuels distributed by networks.) |
| NF D36-113-1-2001 | 使用商用丙烷,商用丁烷和蒸汽相混合物的橡胶和塑料管件和软管组件和配件.第1部分:橡胶,塑料管件和软管的要 | (Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase - Part 1 : requirements for rubber and plastics tubing and ho) |
| NF D36-124-1994 | 家庭节约.通过家用煤气设备,洗衣机和干洗机的软管进行外部连接用自动调节的快速耦合件 | (Household economy. Quick couplings with automatic obturation for the external connection by flexible piping of gas-fired appliances, other than domestic cooking appliances, washing machines and clothes dryers.) |
| NF D36-125-1995 | 家政学.家用煤气设备外部连接用波纹状的挠性金属软管 | (HOUSEHOLD ECONOMY. CORRUGATED METALLIC FLEXIBLE PIPING FOR THE EXTERNAL CONNECTION OF DOMESTIC APPLIANCES USING BUTANE AND PROPANE FROM CYLINDERS.) |
| NF E29-571-1957 | 非金属软管用的螺纹连接管(喷淋用等) | (SCREWED CONNECTIONS FOR NON-METALLIC FLEXIBLE HOSE (HOSE FOR WATERING ETC.).) |
| NF E29-820-1983 | 管道.金属软管.术语 | (Pipeworks. Flexible metal hoses. Terminology.) |
| NF E29-821-1983 | 管道.咬边金属软管.规范 | (Pipeworks. Flexible interlocked metal hoses. Specifications .) |
| NF E29-833-1979 | 管道.双咬边金属软管.(石棉垫片，密封，圆截面，奥氏体不锈钢制) | (PIPEWORKS. FLEXIBLE METAL HOSES DOUBLE INTERLOCK,ASBESTOS PACKING,PRESSURE-TIGHT,CIRCULAR SECTION,IN AUSTENITIC STAINLESS STEEL.) |
| NF E29-834-2003 | 管道工程.波纹状金属软管和软管组件 | (Pipework - Corrugated metal hoses and hose assemblies.) |
| NF E48-080-1989 | 液压和气压传动.连接软管.词汇 | (Fluid power. Hose assemblies. Vocabulary.) |
| NF E48-087-1993 | 线增强橡胶和塑料软管和组件.挠性水压脉冲试验 | (RUBBER AND PLASTICS HOSE AND ASSEMBLIES WITH WIRE REINFORCEMENTS. HYDRAULIC IMPULSE TEST WITH FLEXING. (EUROPEAN STANDARD EN 26802).) |
| NF E48-088-1999 | 橡胶和塑料软管组件.液压脉冲弯曲试验(半Ω 型试验) | (Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test).) |
| NF E51-708-2002 | 建筑物的通风.管道工程.软管的尺寸和机械要求 | (Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts.) |
| NF E86-511-2001 | 低温车辆.低温柔性软管 | (Cryogenic vessels - Cryogenic flexible hoses.) |
| NF F01-082-1968 | 铁路车辆.管路. 软管接头（非金属） | (RAILWAY TRANSPORT EQUIPMENT. PIPEWORK. FIXING OF NON-METALLIC FLEXIBLE PIPES.) |
| NF F01-082M-1970 | 铁路车辆.管路.软管接头(非金属) | () |
| NF F11-018-1981 | 铁路车辆.压缩空气制动装置和空气导管. 直径为２５mm的管用软管 | (RAILWAY TRANSPORT EQUIPMENT. AIR BRAKE AND AIR PIPES. FLEXIBLE HOSES FOR 25 MM PIPES.) |
| NF F11-380-1994 | 铁路车辆.压缩空气橡胶软管 | (RAILWAY ROLLING STOCK. COMPRESSED-AIR RUBBER HOSES.) |
| NF H34-050-1998 | 包装.软管.术语(欧洲包装EN 12374) | (PACKAGING. FLEXIBLE TUBES. TERMINOLOGY. (EUROPEAN STANDARD EN 12374).) |
| NF H34-058-1998 | 包装.柔软管.外壳空气密实度的试验方法(欧洲标准12377) | (PACKAGING. FLEXIBLE TUBES. TEST METHOD FOR THE AIRTIGHTNESS OF CLOSURES. (EUROPEAN STANDARD EN 12377).) |
| NF J22-209-1995 | 小型船舶.抗燃烧燃料软管 | (Small craft. Fire resistant fuel hoses.) |
| NF J22-209/A1-2000 | 油艇.耐火燃料用软管 | (Small craft - Fire resistant fuel hoses.) |
| NF J22-220-2003 | 船舶与海上技术.软管组件耐火性.试验方法 | (Ships and marine technology - Fire resistance of hose assemblies - Test methods.) |
| NF J22-221-2003 | 船舶与海上技术.软管组件耐火性.试验台技术要求 | (Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench.) |
| NF J24-010-1957 | 造船工业.软管.使用总表.直径.材料.接合型.用途.压力 | (SHIPBUILDING. FLEXIBLE PIPING. GENERAL TABLE. DIAMETERS. MATERIALS. TYPES OF JOINT. APPLICATIONS. PRESSURES.) |
| NF J24-020-1957 | 造船工业.软管.船用管道软管的连接.使用总表 | (SHIPBUILDING. FLEXIBLE PIPING. METHODS OF CONNECTING TO SHIPBOARD PIPELINES. GENERAL TABLE.) |
| NF J24-137-1957 | 造船工业.软管.石油产品装船用直套管 | (SHIPBUILDING. FLEXIBLE PIPING. STRAIGHT FILLING NECKS FOR LOADING PETROLEUM PRODUCTS.) |
| NF J24-140-1957 | 造船工业.软管.石油产品装船用小型套管 | (SHIPBUILDING. FLEXIBLE PIPING. REDUCING NECKS FOR LOADING PETROLEUM PRODUCTS.) |
| NF J24-145-1957 | 造船工业.软管.石油产品装船用甲板套筒的软管连接环 | (SHIPBUILDING. FLEXIBLE PIPING. RING COUPLINGS FOR FLEXIBLE PIPES AND FILLING NECKS FOR LOADING PETROLEUM PRODUCTS.) |
| NF J95-029/A1-2000 | 小艇.非耐火燃料软管 | (Small craft - Non-fire-resistant fuel hoses.) |
| NF L40-050-1987 | 飞行器.聚四氯乙烯制的高温盘旋形软管 | (AIRCRAFT. HIGH TEMPERATURE CONVOLUTED HOSE ASSEMBLIES IN POLYTETRAFLUOROETHYLENE (PTFE).) |
| NF L41-210-1983 | 液体系统.软管、管道和接头的脉冲试验 | (Fluid systems. Impulse testing of hose, tubing and fittings.) |
| NF L43-110-1966 | 飞行器的液体装置.软管用插入接头 | (AIRCRAFT FLUID INSTALLATIONS. PLUG-IN UNIONS FOR FLEXIBLE HOSES.) |
| NF M82-011-1987 | 煤矿器材和工具.煤矿器材.风扇型通风管软管道.规范 | (Mining equipment. Flexible venting ducts. Ventubes of the blowing type. Specifications.) |
| NF M82-013-1987 | 煤矿器材和工具.煤矿器材.吸入型通风管软管道.规范 | (MINING EQUIPMENT. FLEXIBLE VENTING DUCTS. VENTUBES OF THE SUCTION TYPE. SPECIFICATIONS.) |
| NF M82-470-1985 | 煤矿器材.橡胶制水软管(压强40bar和100bar) | (COAL MINING EQUIPMENT. RUBBER-BASED FLEXIBLE HOSES FOR WATER (OPERATING PRESSURES 40 AND 100 BAR).) |
| NF M87-208-2-2001 | 石油和天然气工业.海底采油系统的设计和操作.第2部分:海底和海洋设备用软管系统 | (Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2 : flexible pipe systems for subsea and marine applications.) |
| NF M88-262-1978 | 道路罐车.油罐车.油船.非冷冻液态烃的运输.橡胶软管 | (ROAD TANKERS. TANK WAGONS. TANKERS. TRANSFER OF NON-REFRIGERATED LIQUEFIED HYDROCARBONS. RUBBER HOSE PIPES.) |
| NF M88-263-1986 | 石油工业.液化石油气容量配气用软管.规范.检验 | (PETROLEUM PRODUCTS. HOSES FOR VOLUMETRIC SUPPLY OF LIQUEFIED PETROLEUM GAS. SPECIFICATIONS. CONTROLS.) |
| NF M88-402-2001 | 沥青用橡胶软管及软管组件.规范 | (Rubber hoses and hose assemblies for asphalt and bitumen - Specification.) |
| NF M88-768-1980 | 液化烃容器装置.气态物质用接头软管 | (INSTALLATIONS FOR LIQUEFIED HYDROCARBONS IN CONTAINERS. FLEXIBLE COUPLINGS FOR GAS PHASE.) |
| NF R12-618-1997 | 道路车辆.使用非石油基液压液的液压制动系统软管组件 | (Road vehicles. Brake hose assemblies for hydraulic braking systems used with a non-petrolum-base brake fluid.) |
| NF R12-619-1997 | 道路车辆.使用石油基液压液的液压制动系统制动软管总成 | (Road vehicles. Brake hose assemblies for hydraulic braking systems used with a petrolum-base brake fluid.) |
| NF R12-636-1998 | 道路车辆.液压制动系统.导管、螺纹孔、外螺纹接头和软管管端接头 | (Road vehicles. Hydraulic braking systems. Simple flare pipes, tapped holes, male fittings and hose end fittings.) |
| NF R16-207-1955 | 平圆柱形接头软管 | (FLEXIBLE PIPES WITH SMOOTH CYLINDRICAL ENDS.) |
| NF R16-208-1955 | 不对称接头软管 | (FLEXIBLE PIPES WITH ASYMMETRICAL ENDS.) |
| NF S61-113-2003 | 消防水龙带.橡胶和塑料制吸入软管和软管组件 | (Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies.) |
| NF S61-115-2001 | 消防软管.固定系统用半硬性软管 | (Fire-fighting hoses - Semi-rigid hoses for fixed systems.) |
| NF S61-116-2003 | 消防水龙带.泵和水车用半硬度输水软管和软管组合件 | (Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles.) |
| NF S61-201-2001 | 固定的消防系统.水龙带设备.第1部分:带半刚性软管的水龙带卷取机 | (Fixed firefighting systems - Hose systems - Part 1 : hose reels with semi-rigid hose.) |
| NF S61-202-2001 | 固定的消防设备.水龙带设备.第2部分:具有扁平软管的水龙带设备 | (Fixed firefighting systems - Hose systems - Part 2 : hose systems with lay-flat hose.) |
| NF S61-203-2000 | 固定的消防系统.软管系统.第3部分:带半钢性软管的软管卷曲机和带扁平软管的软管设备的维修 | (Fixed firefighting systems - Hose systems - Part 3 : maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose.) |
| NF S61-521-2002 | 消防和营救服务设备.消防用轮式喷水软管绞盘 | (Fire and rescue services equipment - Wheeled hose reels used for firefighting.) |
| NF S76-027-1998 | 呼吸保护装置.带呼吸软管的过滤器、粉尘过滤器、瓦斯过滤器和组合过滤器(不带面具的过滤器).要求、试验、作 | (RESPIRATORY PROTECTIVE DEVICES. FILTERS WITH BREATHING HOSES, PARTICLE FILTERS, GAS FILTERS AND COMBINED FILTERS (NON-MASK MOUNTED FILTERS). REQUIREMENTS, TESTING, MARKING. (EUROPEAN STANDARD EN 12083).) |
| NF S76-032-1995 | 呼吸保护装置.新鲜空气软管呼吸仪的要求、试验、标志 | (RESPIRATORY PROTECTIVE DEVICES. FRESH AIR HOSE BREATHING APPARATUS FOR USE WITH FULL FACE MASK, HALF MASK OR MOUTHPIECE ASSEMBLY. REQUIREMENTS, TESTING, MARKING. (EUROPEAN STANDARD EN 138).) |
| NF S76-037-1995 | 呼吸保护设备.助力空气软管带罩呼吸仪.要求、检验、标记 | (RESPIRATORY PROTECTIVE DEVICES. POWERED FRESH AIR HOSE BREATHING APPARATUS INCORPORATING A HOOD. REQUIREMENTS, TESTING, MARKING. (EUROPEAN STANDAND EN 269).) |
| NF S76-039/A1-2001 | 呼吸保护装置.在喷磨操作中使用的与头罩相连的动力新鲜空气软管呼吸装置或压缩空气线.要求试验和标记 | (Respiratory protective devices - Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations - Requirements, testing, marking.) |
| NF S91-125-1994 | 牙科手枘.软管连接器(EN 29168) | (Dental handpieces. Hose connectors.) |
| NF S95-174-1998 | 医用气体用的低压软管组件 | (Low-pressure hose assemblies for use with medical gases.) |
| NF S95-174/A1-2002 | 医用气体用低压软管组件 | (Low-pressure hose assemblies for use with medical gases.) |
| NF T47-135-1997 | 橡胶,塑料软管和软管组件.电阻的测定 | (Rubber and plastics hoses and hose assemblies. Determination of electrical resistance.) |
| NF T47-201-2002 | 橡胶,塑料软管和软管组件.尺寸的测量方法 | (Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions.) |
| NF T47-202-1996 | 橡胶和塑料软管及软管组件.液压静力试验(欧洲标准EN ISO 1402) | (Rubber and plastics hoses and hose assemblies. Hydrostatic testing.) |
| NF T47-203-2002 | 橡胶或塑料软管.弯曲试验 | (Rubber or plastics hoses - Bending tests.) |
| NF T47-204-1969 | 橡胶.合成橡胶管或软管.用浸渍或接触法测定管抗液体作用的能力 | (RUBBER AND SIMILAR ELASTOMERS. RESISTANCE OF TUBES AND PIPES TO THE ACTION OF LIQUIDS BY CONTACT OR IMMERSION. (TESTING METHODS).) |
| NF T47-205-1993 | 橡胶和塑料软管.静态条件下的耐臭氧性试验的评定 | (Rubber and platics hoses. Assessment of ozone resistance under static conditions.) |
| NF T47-206-1982 | 橡胶和塑料.管和软管的外径、厚度和同心度的测量 | (RUBBER OR PLASTICS BASED HOSES. MEASUREMENTS OF EXTERNAL DIAMETERS WALL THICKNESSES AND CONCENTRICITY.) |
| NF T47-208-1996 | 橡胶软管.外皮的抗磨性测定 | (Rubber hoses - Determination of abrasion resistance of the outer cover.) |
| NF T47-208/A1-2000 | 橡胶软管.外皮抗磨性的测定 | (Rubber hoses - Determination of abrasion resistance of the outer cover.) |
| NF T47-209-1996 | 橡胶和塑料软管.衬里耐磨性测定 | (Rubber and plastics hoses. Determination of abrasion of lining.) |
| NF T47-210-1998 | 橡胶和塑料软管.暴露在氙弧灯下的试验.颜色和外观变化的测定 | (Rubber and plastics hoses. Exposure to a xenon arc lamp. Determination of changes in colour and appearance.) |
| NF T47-214-1998 | 橡胶和塑料软管.易燃烧性试验方法 | (Rubber and plastics hoses. Method of test for flammability.) |
| NF T47-215-1995 | 橡胶和塑料软管.稳定状态下抗紫外线的测定 | (RUBBER AND PLASTICS HOSES. DETERMINATION OF ULTRA-VIOLET RESISTANCE UNDER STATIC CONDITIONS. (EUROPEAN STANDARD EN ISO 8580).) |
| NF T47-217-1995 | 橡胶和塑料软管及软管组件.透气性测定 | (Rubber and plastics hoses and hose assemblies. Determination of permeability to gas.) |
| NF T47-218-1996 | 橡胶和塑料软管.在动力条件下耐臭氧性的评定(欧洲标准EN ISO 10960) | (RUBBER AND PLASTICS HOSES. ASSESSMENT OF OZONE RESISTANCE UNDER DYNAMIC CONDITIONS. (EUROPEAN STANDARD EN ISO 10960).) |
| NF T47-220-2003 | 气焊机.焊接、切割和相关工艺用橡胶软管 | (Gas welding equipment - Rubber hoses for welding, cutting and allied processes.) |
| NF T47-250-2003 | 烃类、溶剂和化学制品输送用热塑性多层(未硫化)软管和软管组件的规范 | (Thermoplastic multi-layer (non vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification.) |
| NF T47-251-1-1997 | 橡胶和塑料软管和软管组件.试验压力和爆破压力与设计工作压力的比值 | (RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES. RATIOS OF PROOF AND BURST PRESSURE TO DESIGN WORKING PRESSURE. (EUROPEAN STANDARD EN ISO 7751).) |
| NF T47-251-1996 | 工业通用橡胶和塑料软管.孔直径和公差.长度公差 | (Rubber and plastics hoses for general-purpose industrial applications. Bore diameters and tolerances, and tolerances on length.) |
| NF T47-252-1997 | 压缩空气用纺织材料增强的橡胶软管规范 | (Rubber hose, textile-reinforced, for compressed air. Specification.) |
| NF T47-253-1997 | 普通供水用纺织材料增强的橡胶软管规范 | (Rubber hoses, textile-reinforced, for general purpose water applications. Specification.) |
| NF T47-254-2000 | 压缩空气织物增强塑料软管.规范 | (Plastic hoses, textile-reinforced, for compressed air - Specification.) |
| NF T47-255-1997 | 测量过的燃料分配用橡胶软管和软管部件规范 | (Rubber hoses and hose assemblies for measured fuel dispensing. Specification.) |
| NF T47-256-1996 | 输送无水氨用橡胶软管和软管组件(欧洲标准EN ISO 5771) | (Rubber hose and hose assemblies for transferring anhydrous ammonia. Specification.) |
| NF T47-257-1997 | 普通供水用带织物加固内衬的塑料软管.规范 | (Plastics hoses, textile-reinforced, for general-purpose water applications. Specification.) |
| NF T47-258-1993 | 吸水和排水用橡胶软管规范 | (Rubber hoses for water suction and discharge. Specification.) |
| NF T47-259-1996 | 橡胶软管和软管组件.织物增强的液压型.规范 | (Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification.) |
| NF T47-262-2003 | 液化石油气和液化天然气输送用热塑性多层(未硫化)软管和软管组件的规范 | (Thermoplastic multi-layer (non vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - specifications.) |
| NF T47-263-1986 | 橡胶软管.水蒸气循环用软管.特性 | (Rubber hoses for vapour circulation. Specifications.) |
| NF T47-264-1995 | 输送蒸汽用橡胶软管.试验方法 | (Rubber hoses for steam. Test methods.) |
| NF T47-265-2002 | 塑料软管.含水材料抽吸和排放用螺旋热塑增强热塑性软管.规范 | (Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharghe of aqueous materials - Specification.) |
| NF T47-266-1999 | 加油车运输用橡胶软管和软管组件.规范 | (RUBBER HOSES AND HOSE ASSEMBLIES FOR FUEL TRUCK DELIVERY. SPECIFICATION. (EUROPEAN STANDARD EN 1761).) |
| NF T47-268-1997 | 飞机加油用橡胶软管和软管组件.规范(EN I361) | (Rubber hoses and hose assemblies for aviation fuel handling. Specification.) |
| NF T47-270-1997 | 橡胶软管和软管组件.液压型橡胶包皮螺旋金属线增强.规范 | (Rubber hoses and hose assemblies. Rubber-covered spiral wire reinforced hydraulic type. Specification.) |
| NF T47-273-2002 | 无气涂漆用橡胶和/或塑料软管和软管组件.规范 | (Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification.) |
| NF T47-274-1993 | 塑料软管.常规用途的可折叠水管, 织物增强.规格(欧洲标准EN 28029) | (Plastics hose. General purpose collapsible water hose, textile reinforced. Specification.) |
| NF T47-275-1998 | 吸油管和排放设备用橡胶软管组件.组件规范 | (Rubber hose assemblies for oil suction and discharge services. Specifications for the assemblies.) |
| NF T47-276-1997 | 喷沙和砂石用橡胶软管规范 | (Rubber hoses for sand and grit blasting. Specification.) |
| NF T47-277-1996 | 用于油燃烧器的软管和软管组件.规范 | (Rubber hoses and hose assemblies for use in oil burners. Specification.) |
| NF T47-280-1997 | 橡胶软管和软管组件.热塑料织物增强液力型.规范 | (PLASTICS HOSES AND HOSE ASSEMBLIES. THERMOPLASTICS TEXTILE REINFORCED HYDRAULIC TYPE. SPECIFICATION. (EUROPEAN STANDARD EN 855).) |
| NF T47-281-1997 | 橡胶软管和软管组件.液压型金属丝编织物增强.规范 | (Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification.) |
| NF T47-282-2002 | 石油类液体的抽吸和低压出料用塑料软管和软管组件规范 | (Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquide - Specification.) |
| NF T47-283-1999 | 液化石油气,达到25BAR(2,5MPa)LGP(液相或气相)的天然气用橡胶软管和软管组件.规范(欧洲标准EN 1762) | (Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification.) |
| NF T47-286-1998 | 橡胶或塑料软管和软管组件.无柔性液压脉冲试验.欧洲标准EN ISO 6803) | (Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing.) |
| NF T47-287-1996 | 橡胶和塑料软管和管系.软管和管壁的透液量的测定 | (RUBBER AND PLASTICS HOSES AND TUBING. DETERMINATION OF TRANSMISSION OF LIQUIDS THROUGH HOSE AND TUBING WALLS. (EUROPEAN STANDARD EN ISO 8308).) |
| NF T47-288-1997 | 橡胶软管和软管组件.液压装置用小型金属丝编织物增强.规范 | (Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification.) |
| NF T47-600-2002 | 橡胶和塑料软管和软管组件.词汇 | (Rubber and plastics hoses and hose assemblies - Vocabulary.) |
| NF U26-241-2000 | 农业喷洒用橡胶软管 | (Rubber hoses for agricultural spraying.) |
| XP D36-110-2000 | 家政学.燃烧丁烷和丙烷的家庭装置用的带夹具的符合NF D 36-101标准的挠性软管的连接件 | (Household economy - Connection assemblies of flexible hoses to standard NF D 36-101 with clamping devices for butane and propane-fired domestic appliances.) |
Like Us on Facebook
Follow Us on Twitter
Follow Us on Instagram
Follow Us on Linkedin
Sunhose
SUNHOSE