What is pvc suction & discharge hose ?
What is PVC suction & discharge hose?
This hose is a lightweight and flexible, high-quality PVC hose specially designed for suction, transfer, or drainage applications where a visual flow is preferred. It is suitable for countless industrial and construction liquid applications where only mild chemical resistance is required. It is more economical and much lighter than similar rubber hoses and has a smooth bore. It is also well suited to outdoor service.
PVC hose with rigid PVC spiral
Designed for transfer of a variety of liquids
Superb resistance to harsh operating environments
Maintains transparency over time
Operating temperature -10C – +60C
Typical Media:
Beverages
Liquids
Non-fatty and non-oily foods
Water
Typical Applications/Markets:
Delivery
In-plant tank transfer
Storage tank transfer
Transportation
Advantages of PVC Suction and Discharge Hose
Using PVC suction and discharge hoses has many benefits which are why these hoses are used extensively for various purposes. These benefits include:
Lightweight
Abrasion-resistant
Economical; less waste
Offers suction and discharge
Heat resistant
Transparent Construction
Smooth or Convoluted Outer Cover
Types of PVC Suction and Discharge Hose
General Clear PVC Suction/Discharge Hose smooth cover : Clear PVC with Helix Suction/Discharge hose has rigid PVC helix for crush resistance and a smooth core for easy suction. It is good for bulk material handling. Always green, clear, and white.
Corrugated PVC Suction/Discharge Hose : This suction/discharge hose is made of rigid PVC helix. It is clear in appearance with a white helix. The range of temperature under which the hose works well is -5 °F to +150 degree °F. The working pressure for this hose is 60-70 psi. It has a small bend radius for tight turns.
- The working pressures listed for this series are 50 – 100 PSI. Use the value for the selected model and grade, not the highest value across the series. Working pressure and burst pressure are separate limits; a burst-test value is not an operating pressure. Where BP is listed, use its pairing with WP in the same row; do not assume one burst ratio for every model. The published range for the standard construction is -5°C – +60°C. Confirm continuous operation with the actual fluid, pressure and duty cycle. No separate short-term peak rating is documented for this series; higher-temperature operation requires a separately confirmed specification. The model table does not document a vacuum limit. Request a suction rating for the exact size, temperature and duty before selection; positive-pressure values do not establish full-vacuum capability.