Hydraulic Hose DIN EN 856 4SP

Hydraulic Hose DIN EN 856 4SP is a very high-pressure application used for petroleum-based hydraulic fluids.En856 4sp hydraulic hoses.

4SP Spiral rubber hose

Tube: Synthetic rubber, resistant against hydraulic fluids.

Reinforcement: Four spiral layers of high tensile steel wire.

Cover: Abrasion and ozone resistant synthetic rubber.

Application: Very high-pressure applications used for petroleum-based hydraulic fluids.

Temp. Range. : -40°C To +125°C (-40°F To +230°F)

Send Message

[email protected]

Specification of Hydraulic Hose DIN EN 856 4SP

Hydraulic Hose DIN EN 856 4SP Medium pressure Hydraulic Lines 165 to 450 bar and hydrostatic transmission lines for use with petroleum, synthetic or water-based fluids in Hydraulic systems. Suitable for Earthmoving & Material handling types of equipment and machinery systems.

Part No.	SIZE		SAE	I.D		W.D		O.D		W. P		P.P		B.P		min B.R		W.T
#	mm	inch	Dash	Min	Max	Min	Max	Min	Max	Mpa	Psi	Mpa	Psi	Mpa	Psi	inch	mm	Kg/m
SH4SP06	6.3	1/4″	-4	6.2	7	14.1	15.3	17.1	18.7	45	6525	90	13050	180	26100	5.91	150	0.64
SH4SP10	10	3/8″	-6	9.3	10.1	16.9	18.1	20.6	22.2	44.5	6450	89	12905	178	25810	7.09	180	0.75
SH4SP13	12.5	1/2″	-8	12.3	13.5	19.4	21	23.8	25.4	41.5	6020	83	12035	166	24070	9.06	230	0.89
SH4SP16	16	5/8″	-10	15.5	16.7	23	24.6	27.4	29	35	5075	70	10150	140	20300	9.84	250	1.10
SH4SP19	19	3/4″	-12	18.6	19.8	27.4	29	31.4	33	35	5075	70	10150	140	20300	11.81	300	1.50
SH4SP25	25	1″	-16	25	26.4	34.5	36.1	38.5	40.9	28	4060	56	8120	112	16240	13.39	340	2.00
SH4SP32	31.5	1-1/4″	-20	31.4	33	45	47	49.2	52.4	21	3045	42	6090	84	12180	18.11	460	3.00
SH4SP38	38	1-1/2″	-24	37.7	39.3	51.4	53.4	55.6	58.8	18.5	2680	37	5365	74	10730	22.05	560	3.40
SH4SP51	51	2″	-32	50.4	52	64.3	66.3	68.2	71.4	16.5	2390	33	4785	66	9570	25.98	660	4.35